MSGID: 2:250/8.1 5c1edfb7   
   CHRS: UTF-8 4   
   TZUTC: 0100   
   REPLY: 2:250/1@fidonet 6256e18f   
   //Hello Vincent,//   
      
   on *4/13/2022* at *14:39:48* You wrote in area *MBSE*   
   to *All* about *"Changing the Standard port number used"*.   
      
   [snip]   
      
    VC> As my main system uses the default of 24554 I have port forwarding set on   
    VC> the router to the main system but need to do the same for port 24555 for   
    VC> the Pi.   
      
    VC> Question how do I change the mbse set up to use this change of port as I   
    VC> cannot   
    VC> find anywhere where this is defined.   
      
      
    VC> Any one have a clue to finding this and changing it ?   
      
   Id be tempted to solve this just using the port forwarding. So just forward   
   port 24555 > IPAddressOfPi > 24554   
      
   If you are determined to change the ports for any configured services, MBSE   
   uses inetd right?   
      
   check out the setup.sh script - at the end of this it configures /etc/services   
   which the inetd service uses.   
   My first step would be to edit /etc/services then try a reboot and see if   
   inetd/xinetd picks up the new service config.   
      
   HTH   
      
   Louis   
   --- WinPoint 400.2   
    * Origin: Another Random *WinPoint* Origin! (2:250/8.1)   
   SEEN-BY: 1/123 15/0 18/200 25/0 21 90/1 103/705 105/81 106/201 120/340   
   SEEN-BY: 123/131 124/5016 129/305 330 331 153/250 757 7715 154/10   
   SEEN-BY: 203/0 218/700 840 220/70 221/0 1 6 226/17 30 227/114 229/110   
   SEEN-BY: 229/111 206 317 400 424 426 428 452 550 664 700 240/1120   
   SEEN-BY: 240/5832 250/0 1 2 3 4 5 6 7 8 10 11 21 263/0 266/512 267/800   
   SEEN-BY: 280/464 5003 282/1038 292/854 8125 301/1 113 317/3 320/219   
   SEEN-BY: 322/757 341/234 342/200 396/45 423/120 460/58 633/267 280   
   SEEN-BY: 633/281 412 416 509 712/848 770/1 100 340 772/210 220 230   
   SEEN-BY: 2452/250 3634/12 5020/1042 5058/104   
   PATH: 250/8 1 301/1 280/464 770/1 633/280 229/426