REPLY: 1:275/201.1 3f1a54d4   
   MSGID: 2:250/1@fidonet 5d9dd4b5   
   CHRS: UTF-8 2   
   TZUTC: 0100   
   TID: MBSE-FIDO 1.0.7.12A (GNU/Linux-x86_64)   
   Hello Phil!   
      
   Tuesday October 08 2019 22:59, you wrote to All:   
      
      
    > Question: When running MBSE under Linux as users are being added to   
    > the system is the main information such as the username being stored   
    > in it's own file or in the /etc/passwd file?   
      
   Both, when a new user is added first it is added into passwd having set up a   
   home directory, with a special shell command then it sets up the user in it    
   own   
   databases.   
      
   The directory used for users is in /opt/mbse/home if using the default PREFIX   
   settings as defined using configure during build.   
      
   Personally as I can run multi boot partitions across different drives I use   
   /home/mbse instead of /opt/mbse.  Note if you do this you MUST using a text   
   editor change SETUP.sh before use and replace all instances of /opt with /home   
      
      
      
   Vince   
      
   --- Mageia Linux v7.1 X64/Mbse v1.0.7.12A/GoldED+/LNX 1.1.5-b20180707   
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)   
   SEEN-BY: 1/123 10/0 1 15/0 2 18/200 19/36 34/999 90/1 102/401 103/705   
   SEEN-BY: 104/57 106/201 116/18 120/331 123/140 128/2 153/757 7715   
   SEEN-BY: 154/10 203/0 218/0 1 210 215 401 410 520 700 720 802 810   
   SEEN-BY: 221/0 227/114 229/354 426 452 1014 230/150 152 240/1120 5832   
   SEEN-BY: 249/206 317 400 250/1 261/38 100 266/512 267/155 275/100   
   SEEN-BY: 280/464 5003 282/1031 1056 291/1 111 292/854 317/3 320/119   
   SEEN-BY: 320/219 322/757 340/400 342/13 200 396/45 423/120 633/280   
   SEEN-BY: 640/1321 712/848 770/1 801/161 189 2452/250 3634/12 5020/1042   
   PATH: 250/1 261/38 218/700 103/705 280/464 229/426