Hello Andrew!   
      
   Monday January 14 2019 02:45, you wrote to me:   
      
    > Hello Vince!   
      
    > 10 Jan 19 14:31, you wrote to me:   
      
    VC>>>> I have reported this before as far as the first isue but found   
    VC>>>> a second problem :   
      
    VC>>>> 1.  The size counts are double than the actual figures.   
    VC>>>> 2.  Aging is also wrong but in this case way wrong for example   
    VC>>>> showing a node   
    VC>>>>     with   
    VC>>>>     ...H..   0  33010108 10/20h 2:250/9@fidonet   
      
    VC>>>>  where the files arrived over the last two days and mail   
    VC>>>> packets only go back 2 days.   
      
    >>> I will take a look at this over the next few days.  I think the   
    >>> age may be the last successful outbound connect to that system,   
    >>> but I won't know until I look at the code.  As far as the size   
    >>> issue, I should be able to check that at the same time.   
      
    > My initial review of the code did not turn up anything that looks out   
    > of whack. I even manually added up what was in the queue for one of my   
    > downlinks that was marked undialable, and it came out exactly to the   
    > byte on size, and the age appeared to be that of the oldest file in   
    > the queue for him.  Does the node that you see the problem with use a   
    > filebox?   
      
   No, no nodes have boxes set up.   
      
   Had problems with them a few years back that may have been the reason why some   
   nodes was getting echos for others so just killed them all off.   
      
   I have now got a back up system running on a Pi 3B+ that rsync with the    
   primary   
   system so when I get a chance I will take a look at what mbout does with that   
   after a rsync run.   
      
   .. hmm might as well try it now .....   
      
   Allowing for a small time difference they are the same :   
      
   Primary:   
      
   -bash-4.3$ mbout sta   
      
   MBOUT: MBSE BBS 1.0.7.11 Outbound Manager   
          Copyright (C) 1997-2018 MBSE Development Team, All Rights Reserved   
      
   flavor try      size age    address   
   ...H..   1   3425356  7/00h 2:250/6@fidonet   
   ...H..   0   1830136 12:19m 2:250/5@fidonet   
   ...H..   0     54412 16:56m 2:250/2@fidonet   
   ...H..   0    164214 11:53  2:250/8@fidonet   
   ...H..   0      2548 11:53  2:250/1.1@fidonet   
   ...H..   0 164826960  8/15h 2:250/9@fidonet   
   ...H..   0    154660 11:54  2:250/4@fidonet   
      
      
   BAckup :   
      
   mbse@raspberrypi:~ $ mbout sta   
      
   MBOUT: MBSE BBS 1.0.7.11 Outbound Manager   
          Copyright (C) 1997-2018 MBSE Development Team, All Rights Reserved   
      
   flavor try      size age    address   
   ...H..   0      2548 14:18  2:250/1.1@fidonet   
   ...H..   0     54412 16:58m 2:250/2@fidonet   
   ...H..   0 164826960  8/15h 2:250/9@fidonet   
   ...H..   1   3425356  7/00h 2:250/6@fidonet   
   ...H..   0      5320  1/16h 2:250/25@fidonet   
   ...H..   0    164214 14:18  2:250/8@fidonet   
   ...H..   0    154660 14:19  2:250/4@fidonet   
   ...H..   0   1830136 12:22m 2:250/5@fidonet   
      
   Both running same version and yes recompiled as primary is AMD and Pi is Arm   
   x32 bit for some reason despite cpu being x64 but distro (Rasbian) is only 32.   
   The older Pi's are all 32bit.   
      
   Pi has had a change to the primary AKA to 2:250/10 where primary is 2:250/1   
      
   and yes I did stop mbsebbs running on the Pi before running rsync then I   
   restarted it.   
      
   Do have different mbsebbs / mbsed scripts in /etc/init.d  | /etc/rc.d/init.d   
      
   Cannot see where it comes from though in the codebase.   
      
      
   Vince   
      
   --- Mageia Linux v6 X64/Mbse v1.0.7.11/GoldED+/LNX 1.1.501-b20150715   
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)