mark lewis wrote to Deon George:   
   ml> which PKT format are you sending from your mystic point to MBSE? it must    
   ml> be type 2+ or type 2.2 for point and/or domain support...   
   ml>    
   ml> type 2.2 is the only one that allows for the 5D domain name in the PKT    
   ml> header...   
      
   I've done some research and cant see anything authoritative that it does. But   
   MBSE does report this in the logs:   
      
   + 06-Sep-2018 23:58:35 mbfido[1186] Packet   : 03e04a78.pkt type 2+   
   + 06-Sep-2018 23:58:35 mbfido[1186] From     : 3:65535/509.1 to 3:633/509   
   + 06-Sep-2018 23:58:35 mbfido[1186] Dated    : 06-10-2018 13:58:27   
   + 06-Sep-2018 23:58:35 mbfido[1186] Program  : Unknown 0xfefe 0.0   
      
   Thats an indicator that it is a 2+ packet right? So does that mean my MBSE is   
   not handling it correctly? I recall somewhere a config about 4d packets, need   
   to look for that, perhaps that is the problem?    
        
   ml> i was able to go back through my mail archive and find some posts about    
   ml> the above document... draft 4 is available at    
   ml> http://bbsdev.net/fsp/FSP-1040.txt and i think it is the last draft... the    
   ml> details i speak of above are found in the notes portion of the document's    
   ml> section "3. Type 2+ Packet"... the first paragraph in that notes section    
   ml> explains why net 65535 is being seen in these PKTs and how to properly    
   ml> handle it...   
      
   Awesome, I'll take a look.   
      
   Thanks...   
      
      
       Greetings, Deon George   
      
   ... "640K ought to be enough for anybody." Bill Gates '81   
      
   --- MBSE BBS v1.0.7.6 (GNU/Linux-ARM)   
    * Origin: Chinwag | MBSE in Docker on Pi (3:633/509)