Hey Vince,   
      
   Vince Coen wrote to Deon George:   
   VC> You have not correctly set up the correct addresses   
      
   Actually I have though. This example is for the 314 network (pinet) that I am   
   connected to. My Mystic IS set for 314:314/180.1, but packets sent to MBSE   
   (which is 314:314/180) appear to be from 314:65535/180.1.   
      
   The same is true for Fidonet Mystic IS configured for 3:633/509.1, but MBSE   
   sees the from as 3:65535/509.1   
      
   I'm joining micronet, and I have Mystic as a Node 618:510/10, and MBSE as the   
   Host 618/510/1 - and the from packets in this case are correct.   
      
   I do have nodelists installled, and a mbout n ... correctly shows my point one   
   and my point zero.   
      
   For this Pinet Echo, the echo already exists in MBSE and my point 1 is already   
   subscribed to it (netmail messages work - even though they too also report as    
   From n:65535/x.1 in the PKT log).   
      
   Is there a PKT tool that I can use to break out and dump the packets to    
   confirm   
    Mystic is sending them with the wrong From address, or if that is not   
   wrong, then it would point to an MBSE setup issue somewhere?   
      
   VC> In my case and normally it is ~/var/arealists and this is created using    
   VC> the file magic processing.   
   VC> ...   
      
   Thanks for this, I was wondering how to do this part :)   
      
   ...deon   
      
      
       Greetings, Deon George   
      
   ... "640K ought to be enough for anybody." Bill Gates '81   
      
   --- MBSE BBS v1.0.7.6 (GNU/Linux-ARM)   
    * Origin: Chinwag | MBSE in Docker on Pi (3:633/509)