Hello All!   
      
   I run a system using echos and files from Fidonet as host 2:25 & 2:250   
      
   I also act as European host for Sportnet.   
      
   I have a few connections (downlinks) for Sportnet where the AKAs are assigned   
   as sportnet first and may be second (if they are also a country host) and the   
   firsd if pressent is for their Fidonet address but these are not used as they   
   do not get any files or fido echos (they might be connected to the region25   
   echo as all downlinks should be).   
      
   I have recently set up a new node with a fido address and at his request also   
   as a node in Sportnet.   
      
   I then linked him in to all echos and files from Sportnet.   
      
   So far so good.   
      
   In security flags I have   
   01 set as everyone   
   02 set as Sportnet   
   32 set as sysop only   
      
   There are others but they are for MIL users only.   
      
   Every downlink is set to 01   
   All Sportnet downlink have 02 set.   
      
   Again so far so good.   
      
   Well I issued an notify messege to the new node who's set up AKA wise is   
   01 fido addr   
   02 Sportnet addr   
      
   The results of issuing the notify to the sportnet address results in NO echos   
   or file area like wise there are NOT shown as being available (as well as    
   being   
   connected).   
      
   OK, I thought change it and remove the Sportnet connection as AKA like wise    
   all   
   echos anf file settings changed at Group delete connection.   
      
   Set up a new entry in the nodes area for his Sportnet only address, set   
   security at 02, added him in to all sportnet files and echo areas, issued a   
   notify to the psortnet address again with no files/echos showing any where.   
      
   I asked him to send a msg with a request for:   
   %HELP   
   %LIST   
   %QUERY   
      
   But again the lists are empty and here is resulting message from my system to   
   his:   
      
   -!-   
   ============   
   Subj: Areamgr LIST report   
   Attr: Private   
   To  : Gonzalo Fernandez Ordas (24:300/4) #1   
   From: Areamgr (24:300/0)   
   Date: Fri Jul 20 2018 08:16 am UTC+1:00 (25 minutes ago)   
      
   Dear Gonzalo Fernandez Ordas:   
      
   The following is a list of available mail groups:   
      
   Group                Description   
   -------------------- --------------------------------------------------   
   @g                   @h   
    The following is a list of all message areas   
      
      
   Group @G - @J (@I)   
   Con  Message area              Description   
   ---- ------------------------- ---------------------------------------------   
   -!- MBSE BBS v1.0.7.6 (GNU/Linux-x86_64)   
   ==========   
      
   [From the node : ]   
   I got the impression those are unresolved variables in the netmail? Is   
   that correct?   
   -!-   
      
      
   As you can see it is empty but worse the flags @G, @H, @J are also empty or   
   only showing the tags.   
      
   Any one know what is happening and why ?   
      
      
      
   Vince   
      
   --- Mageia Linux v6/Mbse v1.0.7.6/GoldED+/LNX 1.1.501-b20150715   
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)