Hello Tony,   
      
   On Sun Jan 08 2017 23:42:00, Tony Comandini wrote to Nicholas Boel:   
      
    TC> Hi Nick welcome to the club, I had the same feeling, but with the help   
    TC> of the Guys and reading better the documentation I'll sort it out.   
      
   I understood everything I was doing. But I'm sure I'll have to go over it a   
   couple times to make sure everything is in the right places, after finishing   
   it the first time.   
      
    TC> Well it depends for which platform you use. I installed on Debian   
    TC> Jessie and RaspBerry PI3 in a "breeze". Didn't need to write by hand   
    TC> msgs areas or files areas. When you familiarize with mbsetup is quite   
    TC> easy.   
      
   I won't either, as I do have areas files for importing all of them.   
      
    TC> I installed on Raspberry PI3 with Raspbian, if you want I am glad to   
    TC> pass you some notes.   
      
   I read your original message, which basically covers INSTALL.in almost to the   
   letter plus a few extra things it looks like you needed to do because of   
   Debian/Raspbian itself. I plan on using a non-Debian based distro anyways, so   
   I'm sure I'll be figuring it all out on my own.   
      
   However, your original post and now knowing it is indeed possible to compile   
   it on ARM devices entices me to continue.   
      
   Regards,   
   Nick   
      
   ... "Не знаю. Я здесь только работаю."   
   --- GoldED+/LNX 1.1.5-b20161221   
    * Origin: thePharcyde_ distribution system (Wisconsin) (1:154/10)