Hello Nicholas!   
      
   08 Jan 17 15:08, you wrote to all:   
      
    NB> Aaaaaand I just got my first relization that mbsetup is extremely   
    NB> overwhelming. In my case, definitely not going to be doable in one   
    NB> sitting.   
      
   It can even be confusing for us that use the software every day! I'm sometimes    
   loosing the location of settings   
   and have to go though a lot of screens to find stuff.   
      
    NB> Has MBSE been installed on ARM devices successfully already? If so, I   
    NB> may finally have a good enough reason to get that ODROID I was looking   
    NB> at and holding myself back from dropping the money on about a week   
    NB> ago.   
      
      
   Is this any help? I haven't tried it on my Pi (the bigger model 1).   
      
      
   === Cut ===   
   = MBSE (3:633/280)    
   ============================================================   
    Msg  : 288 of 291   
    From : Tony Comandini                      2:250/4         14 Dec 16 12:51:00   
    To   : Allen Prunty   
    Subj : Re: Help compiling on a M   
   ===============================================================================   
   -=> Allen Prunty wrote to Vince Coen <=-   
      
      
    AP> On Nov 19, 2016 06:33pm, Vince Coen wrote to Kees Van Eeten:   
      
    VC> What did you do to get it to compile on a Pi as I have another user who   
    VC> has tried it without success.  Likewise on OSX   
      
    AP> Just checking in on if you got OSX to work with it?   
      
   Well the message is for Vince and everybody need it...I installed on Pi3 with   
   this:   
      
   apt-get install xinetd telnetd build-essential sudo git zlib1g-dev   
   git clone git://git.code.sf.net/p/mbsebbs/code mbsebbs-code   
   cd mbsebbs-code   
   chmod a+x SETUP.sh   
   ./SETUP.sh   
   Answer prompts as required.   
   Give the mbse and your account sudo rights by editing /etc/sudoers with    
   visudo.   
   Log out.   
   Log back in as the mbse user.   
   Check out code into mbse user's home directory: git clone   
   git://git.code.sf.net/p/mbsebbs/code mbsebbs-code   
   cd mbsebbs-code   
   sudo apt-get install zlib1g-dev (For Hydra/Binkp zlib compression)   
   sudo apt-get install libgeoip-dev (For GeoIP functions)   
   sudo apt-get install libbz2-dev (For Binkp bzlib compression)   
   ./configure   
   make   
   su   
   To check the value of $MBSE_HOME before installation: echo $MBSE_HOME   
   If correct, run 'make install'.   
   cd /etc/xinetd.d   
   Open the file mbsebbs for editing.   
   Scroll down until you find the telnet section.   
   Set disable = no   
   Change /usr/sbin/telnetd to read /usr/sbin/in.telnetd   
   Save xinetd.d.   
   sudo service xinetd restart   
   ps-ef | grep xinetd   
   Results should be something like:   
   root@mbse:/etc/xinetd.d# ps -aux | grep xinetd   
   root 24925 1 0 22:08 ? 00:00:00 /usr/sbin/xinetd -pidfile /run/x   
   root 24927 24379 0 22:08 pts/1 00:00:00 grep xinetd   
   telnet localhost   
   You should now get:   
   mbse@mbse:/etc/xinetd.d$ telnet localhost   
   Trying ::1...   
   Trying 127.0.0.1...   
   Connected to localhost.   
   Escape character is '^]'.   
   Debian GNU/Linux 8   
   MBSE BBS v1.0.6.5 (Release: Jul 10 2016)   
   Copyright (C) 1997-2015 Michiel Broek, All Rights Reserved   
      
   .--. Welcome at MBSE BBS Professional   
   |o_o | --------------------------------   
   |:_/ |   
   // \\ \\ Abandon all hope ye who have entered cyberspace.   
   (| | )   
   /'\\_ _/\`\\   
   \\___)=(___/   
   Powered by Linux.   
   login:   
   Once you get that, be sure to run: sudo service mbsebbs start   
   The run mbsetup to configure your BBS.   
      
   I left the project because had problems with the configuration, but   
   installation with the above procedure is a breeze...   
      
   Thanks   
      
   Tony   
      
   === Cut ===   
      
      
   Stephen   
      
      
   --- GoldED+/LNX 1.1.5-b20161221   
    * Origin: Dragon's Lair ---:- dragon.vk3heg.net -:--- (3:633/280)