Hello Gert!   
      
   Wednesday December 28 2016 21:53, you wrote to me:   
      
   Well that is a little odd unless that you having installed mbse (with sudo    
   make   
   install or equiv.) forgot to exit the terminal and then login again using a   
   fresh terminal so that the env. settings would be in effect.   
      
   I take it that you are using mbse v1.0.9 and have followed the instructons for   
   installing on a gentoo type distro.   
      
      
   Vince   
   .   
    >  * Reply to message originally in area CarbonArea   
      
    > Hello Vince!   
      
    > Wed Dec 28 2016, Vince Coen wrote to Gert Andersen:   
      
    >>> I just say bad mbsebbs on my third linux system there now not got   
    >>> down of error and it scripts file init.gentoo where it is the   
    >>> /etc/init.d/mbsebbs file there got bad to things for use of ebegin   
    >>> and eend not like to work self if I have added {PATH}: in the   
    >>> script file. Soe there have a solution for that there is that it   
    >>> has worked before. So it can be helped out to work on gentoo.   
      
    VC>> When reporting problems please specify :   
      
    VC>> Exactly what version you are installing.   
    VC>> What Linux distro / version / hardware if not  Intel.   
      
    > The problem was when I on my gentoo linux pc3 was run as root   
    > /etc/init.d/mbsebbs start was mbsebbs comes out with report error in   
    > script file mbsebbs in line line as ebegin and eend and that it was   
    > bad command. But now after some time and 12 hours nothing done got I   
    > it to work by had done a full pc reboot and it works again.   
      
    >   Take care,   
    >             Gert   
      
    >       - Get the best with linux -   
      
      
      
   Vince   
      
   --- Mageia Linux v5/Mbse v1.0.6/GoldED+/LNX 1.1.501-b20150715   
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)