> Hello Rj!   
   > Monday September 26 2016 12:27, you wrote to All:   
   >> All,   
   >> Has anyone seen an error like that come up before? I'm now running   
   >> v1.0.6.8 for my 1:120/544 hub node and that error is coming up for   
   >> when just one of my downlinks attempts to connect:   
   >> + 26-Sep-2016 00:14:54 mbcico[24206] Binkp: send   
   >> "/opt/mbse/var/bso/outbound/0000ffa0.tu3" as "0000ffa0.tu3"   
   >> + 26-Sep-2016 00:14:54 mbcico[24206] Binkp: size 210469 bytes, dated   
   >> Sep 20   
   >> 23:34:29, comp No   
   >> ? 26-Sep-2016 00:14:54 mbcico[24206] tty_write: hanged_up flag   
   >> + 26-Sep-2016 00:14:54 mbcico[24206] Binkp: transmitter failure   
   >> + 26-Sep-2016 00:14:54 mbcico[24206] Binkp: session finished, rc=108   
   >> + 26-Sep-2016 00:14:56 mbcico[24206] Incoming call failed (rc=108)   
   >> + 26-Sep-2016 00:14:56 mbcico[24206] Terminated with error 108   
      
      
   >> The other system uses this (which I'm not familiar with...):   
   >> BinkIT/1.39,JSBinkP/1.54/Win32 binkp/1.1   
   >> Also;  depending on the intent of that error message, it may actually   
   >> be mis-spelled...   
      
   > If it is a system defined in your set up   
      
     He's a downlink, so yes he's in my setup.   
      
      
   > try marking it as BINKD v1.0 and see what happens.   
      
      Good point.   Changed it so that it's *not*  1.1 and then ended up with a   
   different error.   
      
   + 27-Sep-2016 19:28:28 mbcico[18341] Binkp: got M_ERR "Encryption required"   
   + 27-Sep-2016 19:28:28 mbcico[18341] Binkp: receiver failure   
   + 27-Sep-2016 19:28:28 mbcico[18341] Binkp: session finished, rc=108   
   + 27-Sep-2016 19:28:30 mbcico[18341] Incoming call failed (rc=108)   
      
      
     But I can poll his system with no apparent issues...   
      
      
      
      
      
   jame   
      
   --- BBBS/Li6 v4.10 Dada-1   
    * Origin: BBBS Info at Rocasa (1:120/546)