Hello Kees!   
      
   Wednesday December 26 2012 20:42, Kees van Eeten wrote to Andrew Leary:   
      
    WD>>> I hereby request a change to the new makenl-software to cater   
    WD>>> for the absence of "MINphone" in which case no check is   
    WD>>> performed.   
      
    AL>> You should be able to comment out the MINphone statement in your   
    AL>> control file to disable this check.  I just tested it here with   
    AL>> my Regional control file and had no issues with the lack of   
    AL>> MINphone.   
      
    AL>> Are you getting an error message?  Which version of MakeNL do you   
    AL>> have right now?  I just hatched 3.3.1 last night/early this   
    AL>> morning.   
      
    KvE>  I tested with 3.3.0 as 3.3.1 was not available at the time.   
    KvE>  Running a CTL for a full distribution without the MINfone option,   
    KvE>  it threw out a couple of lines with 2 dashes. Setting the level to 2,   
    KvE>  solved this. To me this indicates, dat there is a default value   
    KvE> above 2.   
      
   I will have to look into this further; I haven't been into that section of the   
   code lately.   
      
    KvE>  I agree with Ward, that no testing or a value of 0 should be the   
    KvE> default. Running the test with a ctl file where the default is in   
    KvE> accordance with the the use in the CTL file is not a test that gives a   
    KvE> definitive answer.   
      
   I will look at this tonight and see what I can do for 3.3.2.   
      
    KvE>  As far as I have heard about changes between 3.3.0 and 3.3.1 , no   
    KvE> changes were made to this section of the software.   
      
   Correct.   
      
   Andrew   
      
   ---   
    * Origin: Bits & Bytes BBS * V.Everything! * 860/535-4284 (1:320/119)