TZUTC: -0500   
   MSGID: 416.fidonet-ls_arrl@1:2320/33 28b08c0d   
   PID: Synchronet 3.20a-Win32 master/a59d7d36d Apr 13 2023 MSC 1929   
   TID: SBBSecho 3.20-Win32 master/a59d7d36d Apr 13 2023 MSC 1929   
   BBSID: TBOLT   
   CHRS: ASCII 1   
     D-Rats allows hams to send messages, email, files, ICS forms, etc.,   
   and to chat...all in real time.   
      
     For D-Rats Users, who want to set up multiple filters, such as for   
   QST's and CQ's... so their displays aren't so "cluttered"...this will   
   take care of both QST's and CQ's. I'm not sure if you can have more   
   than "2 filters" or not.    
       
   1) Load up D-Rats as normal.   
      
   2) Under F)ile -> P)references -> Appearance -- look for the window   
   Ignore RegEx   
      
   3) In that box, enter the following:   
      
   \[QST\] \[CQCQCQ:\]   
      
   ***   
        
   WARNING!! It MUST be entered like that, with the backslash, left bracket,   
   string to be filtered, backslash, and right bracket -- if you enter it   
   ANY other way, D-Rats will CRASH as soon as you try to run it!! Then, you   
   have to go to the following location to edit the configuration file.   
      
   C:\Users\(user name)\AppData\Roaming\D-RATS\ D-RATS.config    
      
   Edit it with Windows NOTEPAD -- DO NOT USE Wordpad.   
      
   That way you don't have to reinstall.   
      
   If this folder is NOT available, then you may have to UNINSTALL and   
   REINSTALL the program.   
      
   ***   
      
     It will NOT matter what "color" you set for the "Ignore Color" -- since   
   you will have "2 filters" -- it will be the same as a regular incoming   
   message color for the QST's (that you can select). Plus, the CQCQCQ's   
   will come in as yellow (unless you select a different color), but don't   
   worry about that...the steps below will take care of both of these.   
      
   4) At the top of the chat window, select Add Filter.   
      
   5) In the box, type [QST] and press . Then, repeat that process   
   for [CQCQCQ:] -- you should see a tab for each just below the window   
   where chat messages are.   
      
     When new QST's or CQ's, come in, the text on the label will change to   
   red. Just click on the label to read the QST or CQCQCQ messages...and   
   scroll up or down as needed.   
      
   6) Under F)ile -> Preferences -> Chat -- make sure that the box "Show   
   status updates in chat" is NOT checked.   
      
     To set up a Ratflector to monitor:   
      
   A) Under F)ile - P)references - R)adio -- click on ADD   
      
   B) It will ask you for several values.   
      
   1) The name of the ratflector...enter whatever name you wish.   
      
   2) Type: This is as follows:   
      
   a) Serial -- a D-Star Radio connected to a serial port.   
      
   Click ADD when done, or CANCEL to cancel the process.   
      
   Select the comport and baud rate.   
      
   b) Network -- a network link to a rattflector instance.   
      
   Enter the host address, such as sewx.ratflector.com (for the Southeast   
   US D-Star Weather Net Ratflector).   
      
   Unless directed otherwise, leave the port at 9000, and leave the password   
   field BLANK.   
      
   Click ADD when done, or CANCEL to cancel the process.   
      
   c) TNC -- a KISS-mode TNC connected to a serial port.   
      
   Select the comport and baud rate, as well as the TNC port. If AX.25 is   
   to be used, check the box that says "Enabled".   
      
   Enter the Digi Path, if needed.   
      
   Click ADD when done, or CANCEL to cancel the process.   
      
   d) Dongle -- a locally attached Dongle. If using a DV Dongle, you   
   should use NETWORK as the option, noted above.   
      
   e) AGWPE -- a TNC attached to an AGWPE server.   
      
   Enter the host address, and select the port.   
      
   Enter your user name, password, and the digi path, if needed.   
      
   Click ADD when done, or CANCEL to cancel the process.   
      
     You can set up as many ratflectors as you wish, and you can receive   
   messages on as many as you wish...but you can ONLY transmit on one   
   ratflector at a time, with the following exception -- you create a QST   
   to transmit on ALL the ratflectors you have enabled, by selecting ALL.   
   If you prefer to just send it on the current reflector, just select   
   CURRENT.   
      
     If you need any other assistance setting up D-Rats, there are several   
   files in the D-Star/D-Rats files area here on The Thunderbolt BBS   
   (wx1der.dyndns.org)...or you can leave me a message. I am good via   
   email on QRZ.   
      
   Daryl, WX4QZ, Net Control   
   QCWA CQ100 and D-Star Nets   
   D-Star Food Net   
   Arklatex D-Star Net   
   CERT D-Star Net   
   New Mexico D-Star Net   
   D-Star Trains Net   
   --- SBBSecho 3.20-Win32   
    * Origin: The Thunderbolt BBS - Little Rock, Arkansas (1:2320/33)   
   SEEN-BY: 1/19 123 15/0 16/0 19/10 37 90/1 105/81 106/201 116/17 18   
   SEEN-BY: 123/10 130 131 142/104 153/7715 154/10 30 40 50 700 203/0   
   SEEN-BY: 218/700 840 220/90 221/1 6 360 226/18 30 227/114 229/110   
   SEEN-BY: 229/112 113 206 307 317 426 428 470 664 700 240/5832 266/512   
   SEEN-BY: 280/5003 282/1038 301/1 317/3 320/119 219 319 2119 322/0   
   SEEN-BY: 322/757 335/364 341/66 342/200 396/45 423/81 460/58 633/280   
   SEEN-BY: 712/848 2320/0 33 105 304 401 3634/12 4500/1   
   PATH: 2320/33 105 154/10 221/6 1 320/219 229/426