REPLY: 2:280/464.113 5ed3e953   
   MSGID: 2:5020/545 5ed3f1f1   
   CHRS: CP866 2   
   TZUTC: 0300   
   Good ${greeting_time}, Maurice!   
      
   31 May 2020 17:28:50, you wrote to me:   
      
    AV>> I really like homebrewed experts   
    MK> Me too. Perhaps you might know if the rpi4 can handle the higher   
    MK> speed SSDs on the usb3 interface?   
      
   Yes, I have two "120Gb" SSDs in a RAID-1 /dev/md0 for the root FS here.   
      
    MK> They don't need to be bootable but if so that might be a bonus to   
    MK> some.   
      
   Rpi4 is able to boot only from SD card, but telling the kernel root=/dev/md0   
   works just fine.   
      
   The worst thing with Rpi4's USB is the use of buggy VIA VL805 chip. Hopefully,   
   upcoming new board (one with 8 Gb RAM) would have VL817 instead...   
      
      
   --   
   Alexey V. Vissarionov aka Gremlin from Kremlin   
   gremlin.ru!gremlin; +vii-cmiii-ccxxix-lxxix-xlii   
      
   ... :wq!   
   --- /bin/vi   
    * Origin: http://openwall.com/Owl (2:5020/545)   
   SEEN-BY: 1/123 90/1 120/340 601 123/131 226/30 227/114 702 229/101   
   SEEN-BY: 229/424 426 452 616 664 1014 240/5832 249/206 317 400 292/854   
   SEEN-BY: 317/3 322/757 342/200 633/280   
   PATH: 5020/545 280/464 229/101 426