TZUTC: -0400   
   MSGID: 8.fidonetlinux@1:226/17 214facf2   
   REPLY: 6480.fi-linux@1:2320/105 214d564c   
   PID: Synchronet 3.17c-Linux  May 18 2019 GCC 8.3.0   
   TID: SBBSecho 3.07-Linux r3.114 May 18 2019 GCC 8.3.0   
     Re: Linux & Modems   
     By: Mike Powell to CHARLES STEPHENSON on Fri May 24 2019 10:54 am   
      
    MP> I did not have to do anything to my kernel. I did have to hook up a USB to   
    MP> serial conversion cable to get my USR Sportster to work. Then all I had to   
    MP> do was tell sexpots which device to listen to. Sexpots answers the modem   
    MP> and then makes the telnet connection to the board, connecting the modem   
    MP> call to my dosemu session that runs my DOS bbs.   
      
    MP> I set the device in the sexpots.ini file. For my system, it   
    MP> is /dev/ttyUSB0.   
      
   I have sexpots configured, I have my VOIP configured with a phone number (from   
   my Google voice), I'll have to ad that /dev/ttyUSB0 as the dev that points to   
   my modem. I can't remember how to redirect it to /dev/modem. I'll have to   
   google that....   
   Regards,   
     KrUpTiOn   
   --- SBBSecho 3.07-Linux   
    * Origin: The New Frontier ][ BBS(frontierbbs.net) - [Ohio] (1:226/17)   
   SEEN-BY: 1/17 123 2/105 15/2 100/22 109 226/17 229/275 354 426 452   
   SEEN-BY: 229/616 1014 240/5832 249/206 317 400 280/464 292/854 300/0   
   SEEN-BY: 300/1 317/3 322/757 342/200 393/68 411/38 500/13 633/280   
   SEEN-BY: 3828/7   
   PATH: 226/17 229/426