home bbs files messages ]

Just a sample of the Echomail archive

Cooperative anarchy at its finest, still active today. Darkrealms is the Zone 1 Hub.

   LINUX-UBUNTU      The Ubuntu Linux Distribution Discussion      10,769 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 10,431 of 10,769   
   nospam@nospam.com to All   
   Re: Want to try Beryl on 6.10   
   05 Mar 07 20:42:38   
   
   Path: number1.nntp.dca.giganews.com!border1.nntp.dca.giganews.co   
   !nntp.giganews.com!newscon02.news.prodigy.net!prodigy.net!news.g   
   orb.com!sn-xt-sjc-05!sn-xt-sjc-06!sn-post-sjc-01!supernews.com!c   
   rp.supernews.com!not-for-mail   
   From: NoStop    
   Newsgroups: alt.os.linux.ubuntu   
   Subject: Re: Want to try Beryl on 6.10   
   Date: Mon, 05 Mar 2007 17:42:38 -0800   
   Organization: Uniserve Communications Corporation   
   Message-ID: <1173145295.496722@netadmin1.interbaun.net>   
   References:    
   User-Agent: KNode/0.10.4   
   MIME-Version: 1.0   
   Content-Type: text/plain; charset=us-ascii   
   Content-Transfer-Encoding: 7Bit   
   X-Face: )VP=fukm>#F}!rF_fljRek|bRbO>!4SYo}kNz~uf5xGuL`*Qjj0ZV   
   Ew7-L%o&Nn}gfA_+%;qP%y1ekSO!e1Hi:{voBGw7='*]@+}vY|faM1?mUNqKnY,t   
   XQ|rjT@XC/pgV(LMgBZlIj,^G92Bd255=TopY5qS\EZW-4W::Y   
   X-Complaints-To: abuse@supernews.com   
   Lines: 31   
   Xref: number1.nntp.dca.giganews.com alt.os.linux.ubuntu:11604   
      
   Dick Sutton wrote:   
      
   > I normally run Ubuntu 6.06 LTS.  However, I am experimenting with 6.10   
   > in another partition.  I would like to try to set up Beryl on the 6.10   
   > system.  My hardware is an Intel 2.60 celeron processor with 1GB ram.   
   > The video is the Intel onboard Extreme Graphics 3D   
   > 82845G/GL[Brookdale-G]/GE chipset (uses the i810 driver).  I realize   
   > that this is marginal, but it's what I've got.  I've read that people   
   > have run Beryl on this video chipset.   
   >    
   > My question is, does anyone know of a step-by-step for installing Beryl   
   > (with my chipset in mind)?   
   >    
   > I have googl'ed this and all the instructions are based on the nVidia   
   > cards (for obvious reasons).  The Ubuntu wiki isn't very helpful.  Can   
   > someone point me in the right direction?   
   >    
   > Thanks in advance...   
   >    
   > Dick   
      
   Well just install beryl and it's components, if you already have a graphics   
   driver that will do 3d rendering.   
      
   Cheers.   
      
      
   --    
   The "Wow" starts now.   
   http://www.youtube.com/watch?v=KyLqUf4cdwc&eurl=   
   --- Platinum Xpress/Win/WINServer v3.0pr5   
    * Origin: Omicron Theta BBS (1:261/20)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca