Hello Scott!   
      
   21 Jun 2012 15:27, Scott Street wrote to mark lewis:   
      
    SS> ÔóÜÔóÉÔóÉÔóÉÔóØ   
      
    SS> This will be translated - and should be.   
      
   so i can read it here scrampled   
      
    SS> Well, might not be if you don't have utf-8 to iso8859-1 setup;   
      
   this is a no go !   
      
    ss> if that is the case, then this message should come across as    
    SS> Content-type: text/plain; charset=unknown-8bit.   
      
   sure if unicode is just 8 bit   
      
    SS> Good luck.   
      
   thanks for learning me more about it   
      
      
   i will share my xlat table again:   
      
      ----- xlat begins -----   
   # Charset configuration for JamNNTPd using Unicode   
   #   
   # It is necessary to still have the "read" translations for the charsets you   
   # will be posting in or JamNNTPd will not be able to translate the receiver    
   # name properly. Unfortunately posting in utf-8 is not possible at this time.   
      
   chsdir /etc/jamnntpd/xlat.d   
      
   defaultread IBMPC   
      
   read CP437      utf-8         437_utf.chs   
   read CP850      utf-8         850_utf.chs   
   read CP865      utf-8         865_utf.chs   
   read CP866      utf-8         866_utf.chs   
   read LATIN-1    utf-8         iso_utf.chs   
      
   read CP437      iso-8859-1    437_iso.chs   
   read CP850      iso-8859-1    850_iso.chs   
   read CP865      iso-8859-1    865_iso.chs   
   read CP866      koi8-r        866_koi.chs   
   read LATIN-1    iso-8859-1   
      
   # from jamnntpd   
   read UTF-8      utf-8   
      
   readalias IBMPC,850  CP850   
   readalias IBMPC,865  CP865   
   readalias IBMPC,866  CP866   
   readalias IBMPC      CP437   
      
   defaultpost iso-8859-1   
      
   post iso-8859-1 LATIN-1   
   post koi8-r     CP866         koi_866.chs   
      
   postalias windows-1252 iso-8859-1   
   postalias iso-8859-15  iso-8859-1   
   postalias us-ascii     iso-8859-1   
      ----- xlat ends -----   
      
   needs fixing ?   
      
      
    Regards Benny   
      
   ... there can only be one way of life, and it works :)   
      
   --- Msged/LNX 6.2.0 (Linux/3.1.10-gentoo-r1 (i686))   
    * Origin: home.junc.org where qico is waiting (2:230/0)