NB> On 10/21/2012 04:41 PM, mark lewis -> Nicholas Boel wrote:   
    NB>> @MSGID: 1:154/10.1 508REPLYADDR accessdPLYADDR accessd@pharcyde.org   
      
   note the breakage above... those left here as two lines...   
      
    NB>> @PID: JamNNTPd/Linux 1/b5   
    NB>> @CHRS: LATIN-1 2   
    NB>> @TZUTC: -0500   
    NB>> @TID: hpt/lnx 1.9.0-cur 28-01-12   
    NB>> On 10/21/2012 02:58 PM, mark lewis -> Bj”rn Felten wrote:   
      
    > [trim]   
      
    > it made it and here's yer control lines ;)   
      
    NB> Well I'll be damned. Mystic won't show that message to me, nor will   
    NB> it show any message that I've posted via the news reader without   
    NB> the   
    NB> To:  line as the first line of the body. If you posted all   
    NB> control lines, it looks like that message was missing a couple; ie.   
    NB> any To: fields..    
      
   TO: fields are converted by jamnntpd as they should be...   
      
    NB> Hopefully this has nothing to do with JAM, but instead, maybe   
    NB> Mystic itself just doesn't know how to display something without a   
    NB> proper To: field.    
      
   possibly... but you need to get your jamnntpd up to the 1.0 release code and   
   get off that beta5...   
      
   [time passes]   
      
   i just went looking to see what i had... seems that i downloaded the   
   jamnntpd-1.0-os2.zip archive (229.1KB) but there is also a jamnntpd-1.0.zip   
   archive available, (157.6KB) too... both have the same date of 2009 Jul 29 as   
   do all the other archives at johan's mercurial repository located over at   
   https://bitbucket.org/johanbilling/jamnntpd/downloads   
      
   looks like i might wanna grab a few more things from there... loganalyzer   
   being one... checkgroups maybe being another... areasbbs2jamnntpd might be ok   
   but i don't use areas.bbs files on my system...   
      
   but anyway, you mentioned something about "non-programer" before... you're on   
   linux, right? you can run make to compile programs you download as source? if   
   yes, i'd grab that jamnntpd-1.0.zip archive from the above mercurial   
   repository and compile it for use... it is the original code and will   
   hopefully correct these problems you're running into... you need to get   
   everything as stable as you can before any real troubleshooting can be done...   
      
   )\/(ark   
      
    * Origin:  (1:3634/12)