Hello Tommi!   
      
   14 Mar 2012 15:01, Tommi Koivula wrote to Benny Pedersen:   
      
    TK> I was reading anonymously private messages at your server but you    
    TK> blocked me just before I wrote a message to you about it.   
      
   should that not be limited to only fidotest ?   
      
      ----- allow begins -----   
   # Allowed IP numbers for JamNNTPd   
   #   
   # Syntax:   
   #   
   #      
   #   
   # "*" can be used as a wildcard. Everything after "*" is ignored, i. e.   
   # 127.0.*.1 is equivalent to 127.0.*. Just write "*" alone on a line to   
   # allow all IP numbbers.   
   #   
   # If no access groups are configured, users connecting from that IP will   
   # not be able to access any newsgroups unless they log in.   
   #   
   # "*" means "all groups" and "-" means "no groups".   
   #   
      
   127.0.0.1 * A   
      
      ----- allow ends -----   
      
   how do i make the default there ?   
      
      ----- groups begins -----   
   # Groups configuration for JamNNTPd   
   #   
   # Syntax:   
   #   
   #     [] [-nochrs]   
   #   
   # The tagname is the name of the group. If you enter a '!' character in front   
   # of the tagname, the area will be treated as a netmail area and users can    
   # only read messages to or from their realname(s). If you enter a '$' in   
   # front of the tagname, the area will be treated as a local area which means   
   # that posted messages will have no address, no tearline and no origin line.   
   #   
   # The default charset (optional) is the assumed charset when no CHRS or   
   # CODEPAGE line is found. If the default chrs begins with a "!" character,   
   # the "force" mode is activated for that group. In "force" mode, the    
   # specified charset is used regardless of the contents of the CHRS and    
   # CODEPAGE lines and messages can only be posted in charsets that can    
   # be translated to the forced character set.   
   #   
   # If -nochrs is specified, no CHRS will be created when messages are   
   # posted in this area.   
   #   
   # !NETMAIL              A 2:205/454.77 c:\fido\areas\NETMAIL   
   # R20_TEKNISKT_RASERI   A 2:205/454.77 c:\fido\areas\R20_TEKNISKT_RASERI   
   # R20_AMIGA             A 2:205/454.77 c:\fido\areas\R20_AMIGA               
   LATIN-1   
   # RU.COMP.HUMOR         A 2:205/454.77 c:\fido\areas\RU.COMP.HUMOR           
   !CP866   
   # $LOCAL                A 2:205/454.77 c:\fido\areas\LOCAL   
   #   
   !NETMAIL A 2:230/0 $/home/xpoint/fido/msgb/NETMAIL   
   #   
   $ARCHIVED A 2:230/0 $/home/xpoint/fido/msgb/ARCHIVED   
   $BAD A 2:230/0 $/home/xpoint/fido/msgb/BAD   
   $CARBONAREA A 2:230/0 $/home/xpoint/fido/msgb/CARBONAREA   
   $DUPE A 2:230/0 $/home/xpoint/fido/msgb/DUPE   
   #   
   NORD A 2:230/0 $/home/xpoint/fido/msgb/NORD   
   NORD_ADMIN A 2:230/0 $/home/xpoint/fido/msgb/NORD.ADMIN   
   NORD_CHAT A 2:230/0 $/home/xpoint/fido/msgb/NORD.CHAT   
   NORD_FIDONET A 2:230/0 $/home/xpoint/fido/msgb/NORD.FIDONET   
   NORD_HARDWARE A 2:230/0 $/home/xpoint/fido/msgb/NORD.HARDWARE   
   NORD_INTERNET A 2:230/0 $/home/xpoint/fido/msgb/NORD.INTERNET   
   NORD_KULTUR A 2:230/0 $/home/xpoint/fido/msgb/NORD.KULTUR   
   NORD_PROG A 2:230/0 $/home/xpoint/fido/msgb/NORD.PROG   
   NORD_SOFTWARE A 2:230/0 $/home/xpoint/fido/msgb/NORD.SOFTWARE   
   NORD_TEKNIK A 2:230/0 $/home/xpoint/fido/msgb/NORD.TEKNIK   
   #   
   ENET_POLITICS A 2:230/0 $/home/xpoint/fido/msgb/ENET.POLITICS   
   ENET_SOFT A 2:230/0 $/home/xpoint/fido/msgb/ENET.SOFT   
   ENET_SYSOP A 2:230/0 $/home/xpoint/fido/msgb/ENET.SYSOP   
   ENET_TALKS A 2:230/0 $/home/xpoint/fido/msgb/ENET.TALKS   
   #   
   FIDOSOFT_HUSKY A 2:230/0 $/home/xpoint/fido/msgb/FIDOSOFT.HUSKY   
   FIDOTEST A 2:230/0 $/home/xpoint/fido/msgb/FIDOTEST   
   JAMNNTPD A 2:230/0 $/home/xpoint/fido/msgb/JAMNNTPD   
   LINUX A 2:230/0 $/home/xpoint/fido/msgb/LINUX   
   #   
      ----- groups ends -----   
      
   is the trick to make fidotest into another group that is writeble from any ip ?   
      
      ----- config begins -----   
   # JamNNTPd configuration file   
   port 119   
   max 5   
   groups "/etc/jamnntpd/groups"   
   allow "/etc/jamnntpd/allow"   
   users "/etc/jamnntpd/users"   
   xlat "/etc/jamnntpd/xlat"   
   logfile "/var/log/jamnntpd.log"   
   noecholog   
   #debug   
   #readorigin   
   #noencode   
   #strictnetmail   
   def_flowed on   
   def_showto on   
   #nostripre   
   notearline   
   noreplyaddr   
   notzutc   
   nocancel   
   smartquote   
   origin "jamnntpd on home.junc.org port 119"   
   #guestsuffix    
   #echomailjam    
      ----- config ends -----   
      
    BP>>  * Origin: jamnntpd on home.junc.org port 119 (2:230/0)   
      
    TK> -+- 502 Access denied.   
      
   tell me what i make as error, so i can correct it   
      
      
    Regards Benny   
      
   ... there can only be one way of life, and it works :)   
      
   --- Msged/LNX 6.2.0 (Linux/3.1.10-gentoo-r1 (i686))   
    * Origin: home.junc.org where qico is waiting (2:230/0)