TID: FMail-W32 2.1.3.7-B20170919   
   RFC-X-No-Archive: Yes   
   TZUTC: 0100   
   CHRS: CP850 2   
   MSGID: 2:280/5555 605dd53b   
   REPLY: 2:221/360 605d75d1   
   Hello Tommi,   
      
   On Friday March 26 2021 07:46, you wrote to me:   
      
    MV>> So you first made an IPv4 connect and then manually entered an   
    MV>> override to use fido6.vlist.eu instead of fido.vlist.eu?   
      
    TK> Exactly.   
      
   Two questions:   
      
   1) Where does the fido6.vlist.eu come from? It exists in the DNS but it is   
   only for local use and not advertised in the nodelist. It is not advertised   
   anywhere AFAIK. Maybe I mentioned it somewhere and forgot? Or maybe you just   
   happened to make the right guess?   
      
    TK> That happens because Radius resolves the hostname and uses the ipv4   
    TK> address, even when connecting via proxy.   
      
   2) So this manual override works only for my node and to connect to another   
   node you have to make another override? IOW manually enter a new line in the   
   config for each node that is to be connected via IPv6?   
      
    TK> Binkd works 'better' in this case, it just passes the hostname to the   
    TK> proxy and then proxy does the resolving job.   
      
   Understood.   
      
      
   Cheers, Michiel   
      
   --- GoldED+/W32-MSVC 1.1.5-b20170303   
    * Origin: he.net certified sage (2:280/5555)   
   SEEN-BY: 1/123 19/10 90/1 105/81 120/340 123/131 124/5016 154/10 203/0   
   SEEN-BY: 220/70 221/0 6 226/17 30 227/702 229/424 426 550 664 700   
   SEEN-BY: 229/1016 240/5832 249/206 317 400 250/1 267/800 280/464 5003   
   SEEN-BY: 280/5006 5555 282/1038 292/854 8125 310/31 317/3 322/757   
   SEEN-BY: 340/1000 342/200 423/120 460/58 633/0 267 280 281 410 412   
   SEEN-BY: 633/416 509 640/1384 712/848 770/1 100 340 772/210 220 230   
   SEEN-BY: 2452/250 5019/40 5020/545 1042 12000 5053/58   
   PATH: 280/5555 464 770/1 633/280 229/426