TZUTC: -0300   
   MSGID: 4691.fidonetipv6@4:902/26 23f392b1   
   REPLY: 2:460/5858 5f723469   
   PID: Synchronet 3.18c-Linux  Oct 14 2020 GCC 6.3.0   
   TID: SBBSecho 3.11-Linux r3.179 Oct 14 2020 GCC 6.3.0   
   CHRS: CP437 2   
   El 28/9/20 a las 16:05, Stas Mishchenkov escribió:   
   > Hi Fernando!   
   >    
   > Sunday September 27 2020 16:38, you wrote to Michiel van der Vlist:   
   >    
   >   >> Remarks:   
   >   >>   
   >   >> f     Has a ::f1d0::: style host address.   
   >    
   >   FT> Very nice!, can i get these address using he.net tunnel?   
   >    
   > Yes. You will get subnet /64 and can asign any address from it to ypur node.   
   >    
   >    
   hi! I have the following config (I'm on debian stable):   
      
   auto he-ipv6   
   iface he-ipv6 inet6 v4tunnel   
            address 2001:470:1f1e:4e::2   
            netmask 64   
            endpoint 64.71.156.86   
            ttl 255   
            gateway 2001:470:1f1e:4e::1   
            up ip link set mtu 1480 dev he-ipv6   
      
      
   should I put the following configuration to add another alias address?   
      
   auto he-ipv6:1   
   iface he-ipv6:1 inet6 v4tunnel   
            address ::f1d0:4:902:26   
            netmask 64   
            endpoint 64.71.156.86   
            ttl 255   
            gateway 2001:470:1f1e:4e::1   
            up ip link set mtu 1480 dev he-ipv6   
      
      
   should be the endpoint and the gateway same as primary address?   
   thansk!   
   --- SBBSecho 3.11-Linux   
    * Origin: Dock Sud BBS - http://bbs.docksud.com.ar (4:902/26)   
   SEEN-BY: 1/123 4/0 88/0 90/0 1 120/340 123/131 135/367 226/30 227/702   
   SEEN-BY: 229/424 426 550 664 1016 240/5832 249/206 317 400 317/3 322/757   
   SEEN-BY: 342/200 633/280 900/0 100 102 106 108 902/0 6 19 26 27 100   
   PATH: 902/26 27 90/1 229/426