TID: FMail-W32 2.1.3.7-B20170919
TZUTC: 0200
CHRS: CP850 2
MSGID: 2:280/5555 5d2d0339
REPLY: 2:310/31 5d2ceb26
Hello Richard,
On Monday July 15 2019 23:06, you wrote to me:
RM>>> https://ipv6.menedetter.net/
MV>> For the IPv4 test, IPvFox says I am connected via IPv4 but the
MV>> button still says "Connected via IPv6". I know why that is, I ran
MV>> into that problem before.;-)
RM> Why?
This part:
Even when I use ipv4.menedetter.net and so have my system connect to your's by
IPv4, the above code is executed on MY system and it calls ipv6-test.com over
IPv6 because my system supports IPv6. And so ipv6-test.com reports that I
connect by IPv6.
The button reports how I connect to ipv6-test.com, not how I connect to YOU.
RM>>> The speedtest is not extremely accurate, but IMO it is good
RM>>> enough to get an estimate.
MV>> My provider says I have 50/5
RM> For IPv4 it sounds good.
RM> Question is why is IPv6 so much slower.
I don't know. But it is not incidental. The speed varies a bit but the
difference between IPv4 and IPv6 is consistent. IPv6 speed is about half of
IPv4.
RM> And if the problem is on my side or yours or both ;)
Other dual stack speed tests perforned from here show no consistent sigificant
difference between IPv4 and IPv6...
Cheers, Michiel
--- GoldED+/W32-MSVC 1.1.5-b20170303
* Origin: he.net certified sage (2:280/5555)
SEEN-BY: 1/123 15/2 19/10 154/10 203/0 221/0 6 226/17 229/354 426
SEEN-BY: 229/1014 240/5832 249/206 317 400 280/464 5003 5006 5555
SEEN-BY: 292/854 310/31 317/3 322/757 342/200 423/120 460/58 633/280
SEEN-BY: 640/1384 712/848 770/1 2452/250 3828/7 5019/40 5020/545 1042
SEEN-BY: 5020/12000 5053/58
PATH: 280/5555 464 229/426
|
