MSGID: 2:230/0 5cce1f4e   
   TZUTC: 0000   
   REPLY: 2:221/360 5c0b6178   
   CHRS: LATIN-1 2   
   TID: hpt/lnx 1.9.0-cur 17-02-17   
   Hello Tommi!   
      
   08 Dec 2018 08:15, Tommi Koivula wrote to Ward Dossche:   
      
    WD>> I think there may be a problem there. The router is ISP-provided and   
    WD>> pretty good. However there are 3 lvels to log into "User", "Admin" and   
    WD>> "Expert" and they only give-out the password for "User".   
      
   +1   
      
    TK> ISP-provided routers are usually not-pretty-good, because "they" are    
    TK> in control, not you.   
      
   +1, ward may have nice isp that would help him getting ipv6 working in there   
   control :)   
      
   since ipv6 is not natted, its only a matter of make the windows 7 with statick   
   ipv6 ipv4, and then open the routers firewall, aswell in windows 7, not ipv6   
   needs firewall in endpoints not in routers, but it need to be open both places   
      
   have in mind that ip is on ipv6 direct, then its more understandble why it   
   works or not   
      
    TK> I've got one Huawei LTE router with ISP branded firmware which doesn't   
    TK> allow incoming IPv6 not matter what. Even with "admin" rights...   
      
   thats another problem ward do not have yet   
      
      
    Regards Benny   
      
   ... there can only be one way of life, and it works :)   
      
   --- Msged/LNX 6.1.2 (Linux/4.19.27-gentoo-r1 (x86_64))   
    * Origin: I will always keep a PC running CPM 3.0 (2:230/0)   
   SEEN-BY: 1/123 15/2 154/10 201/0 203/0 2 124 211/37 221/0 1 226/17   
   SEEN-BY: 229/354 426 1014 230/0 240/5832 249/206 317 400 280/464 5003   
   SEEN-BY: 280/5006 5555 292/854 310/31 317/3 320/219 322/757 342/200   
   SEEN-BY: 393/68 423/81 120 633/280 712/848 770/1 2452/250 3634/24   
   SEEN-BY: 3828/7 5020/545   
   PATH: 230/0 203/0 280/464 229/426