04 Oct 15 01:00, you wrote to me:   
      
    MV> You will see lots of IPv6 addresses that won't backresolve in   
    MV> future...   
      
   Yes indeed.   
      
   Now it should call back in this case also.   
      
    MV>>> O wait. When I tried it on my main system, I saw that the reply   
    MV>>> did not come from *::f1d0:2:221:6 but from a PE address. So   
    MV>>> there is no channel opened in my firewall voor that.   
      
    TK>> That's because Win2003 always sets (and defaults outgoing) slaac   
    TK>> address even if I have set manually   
    TK>> 2001:470:1f15:cb0:f1d0:2:221:6.   
      
    MV> Oh?  No way to tell it to use the manually set address?   
      
   I believe so. I googled about this and it seems so. WinXP and Win2003 are so   
   dumb about this, later Windozes do not force the slaac address if there is   
   manually set address available.   
      
   I could turn off radvd in the router, but then I'd have to manually configure   
   every client.   
      
   Bindaddr in binkd config might help, but that's only fine tuning. It doesn't   
   really matter from what ip the call goes out.   
      
   'Tommi   
      
   ---   
    * Origin: 2001:470:1f15:cb0:f1d0:2:221:6 (2:221/6)