Hello Tommi,   
      
   On Saturday October 03 2015 11:49, you wrote to All:   
      
    TK> If you send a file 'test' to 2:221/6, the system tries to call you   
    TK> back. :)   
      
   It does not work from my point 1. This may have to do with the fact that PE   
   are enabled on my laptop running Win 7 pro?   
      
   The IPv6 address that is assigned by SLAAC (kbt.vlist.eu) is not used for   
   outgoing and so you do not see it. The temp PE address when used for incoming   
   may not pass the firewall.   
      
   OTOH..  the previous outgoing connection should have opened a channel   
   shouldn't it?   
      
   I womder what you see on yiur end. Here is wmat I see:   
      
     14:18 [4672] BEGIN standalone, binkd/1.1a-52/Win32 binkd.cfg   
     14:18 [4672] servmgr started   
     14:18 [4676] clientmgr started   
   - 14:18 [4672] servmgr listen on *:24554   
   + 14:24 [5424] call to 2:221/6@fidonet   
     14:24 [5424] trying cow.dy.fi [2001:470:1f15:cb0:f1d0:2:221:6]...   
     14:24 [5424] connected   
   + 14:24 [5424] outgoing session with 2001:470:1f15:cb0:f1d0:2:221:6   
   - 14:24 [5424] OPT CRAM-MD5-452c1285c204865d03a7f03525d636ee   
   + 14:24 [5424] Remote requests MD mode   
   - 14:24 [5424] SYS RBBv6 COW   
   - 14:24 [5424] ZYZ Tommi Koivula   
   - 14:24 [5424] LOC Lake Ylo, Finland   
   - 14:24 [5424] NDL BND,ICM,NNTP,IPv6   
   - 14:24 [5424] TIME Sat,  3 Oct 2015 15:24:32 +0300   
   - 14:24 [5424] VER binkd/1.1a-73/CYGWIN_NT-5.2 binkp/1.1   
   + 14:24 [5424] addr: 2:221/6@fidonet   
   - 14:24 [5424] OPT EXTCMD GZ BZ2   
   + 14:24 [5424] Remote supports EXTCMD mode   
   + 14:24 [5424] sending \point\outbound\test as test (8)   
   + 14:24 [5424] sent: \point\outbound\test (8, 8.00 CPS, 2:221/6@fidonet)   
   + 14:24 [5424] done (to 2:221/6@fidonet, OK, S/R: 1/0 (8/0 bytes))   
     14:24 [5424] session closed, quitting...   
      
   O wait. When I tried it on my main system, I saw that the reply did not come   
   from *::f1d0:2:221:6 but from a PE address. So there is no channel opened in   
   my firewall voor that.   
      
   Or is it someting else?   
      
      
   Cheers, Michiel   
      
   --- GoldED+/W32-MSVC 1.1.5-b20130111   
    * Origin: Michiel's laptop (2:280/5555.1)