Hi All,   
      
      
   Ok, It's been a while since I've setup nat, forwarding, firewalls or anything   
   on a router, I used to have cisco that I could telnet to to point the outside   
   ip to the corrrect inside ip with no trouble, now I have a 2wire wireless   
   router and everything is graphical, I've went as far as setting up dmzplus   
   mode, which I know is dangerous, and I've also opened all required ports up and   
   pointed them to my bbs machine but the 2wire router is'nt showing a public ip   
   adress and is not forwarding the ports, nayoneone have any idea what gives   
   here? I have windows firewall working corrrectly.. here is some data from the   
   2wire gui setup.   
      
      
   Device          Allowed Applications    Private IP address      Public IP   
   address   
   user-0a286e9781         FTP Server   
   ^^ this system used to be wired to my hub and does'nt exist on the network   
   anymore and I cannot delete it from the table.   
      
   DNS Server   
   POP3 Server   
   SMTP Server   
   SSH Server   
   Telnet Server   
   Web Server   
           0.0.0.0   
   vexed2-b32bcad6         All     69.40.17.46   
   ^^^ This is the system with the BBS   
      
   this is the setup with dmzplus and I cannot get it to do anymore   
      
   it wont setup corrrectly using nat or whatever.. lemme see if I can get data on   
   that   
   this gui crap has made it harder thatn ever to get things done, it used to be   
   so easy just to telnet into my cisco box.   
      
   Ahhhh I see now.. I was assigning to both systems and did'nt know it.. with me   
   luck!   
      
      
      
   ---   
    þ Synchronet þ Warzone - I WILL open sooner or later... possibly :)   
    * Origin: Time Warp of the Future BBS - Home of League 10 (1:340/400)