Hello Richard,   
      
   >> Telling Linux to enlarge that window and restarting Golded causes   
   >> Golded to use the same portion of a larger window. Telling both Linux   
   >> and Golded to use the same size terminal window allows Golded to "Fill   
   >> Out" the window that it is running in. I have edited the window   
   >> profile to maintain the settings for when Golded is loaded in the   
   >> future.   
      
   > I do not really understand what you mean by tellinf Linux and Golded.   
   > I have a terminal window.   
      
   > If I make it bigger and restart Ged+ it will use the space.   
      
   Here, if I use a a terminal window larger than what Golded seems to like    
   Golded  (After a restart) will use a portion of that window. If I make the   
   window larger than the display (The window extends off the screen) then the   
   Golded display is pretty much unreadable. And things like message date and   
   time are not displayed. And scrolling causes the Golded display to be garbled   
   and pretty much unreadable. I have found a terminal display setting that both   
   Golded and Linux seem to be happy with.     
      
   > Like this:   
   > https://vserv.ricsi.priv.at/ged.png   
      
   That is pretty much what I see now with the terminal set to 132x39. Any larger   
   than that and Golded is unhappy.   
      
   >> As a sidenote. I have tried to use an edited version of the   
   >> "Advanced.cfg" file for Golded but something in the "Advanced" version   
   >> causes Golded to fail to open at all.   
      
   > What error do you get?   
      
   No error at all. I am simply returned to the terminal command prompt. If I use   
   the simple CFG file then Golded opens up fine. I am slowly adding necessary   
   keywords to see if and when Golded fails to load. I suspect that there is a   
   keyword that is causing the problem.   
      
   Jeff   
      
   --- BBBS/Li6 v4.10 Toy-3   
    * Origin: The OuijaBoard - Anoka, MN  (1:282/1031)