TID: Mystic BBS 1.12 A48   
   REPLY: 2:240/77 67400163   
   MSGID: 4:930/1 67507457   
   CHRS: CP437 2   
   TZUTC: -0500   
      
      Hello nugax!   
      
   22 Nov 24 04:54, Kai Richter wrote to you:   
      
    KR> Hello nugax!   
      
    KR> 17 Nov 24, nugax wrote to Kai Richter:   
      
    n>> Well awesome. Got somewhere with the instructions!   
      
    n>> So, I have a basic install and the program started. I have the   
    n>> AREADEF file of my Mystic file areas. How do I include that so I   
    n>> my message areas show.   
      
   Taking this from advice given to me by Mick, I think...   
      
   I did this and worked for me, just make sure your golded.cfg or template   
   have the Origin and TEARLINE set properly because I found out that   
   parameter is not exported by Mystic so, bare that in mind.   
      
   I'm using Mystic on windows but should be the same on linux.   
      
   > If you'd like full access to your message bases, without having to   
   > do multiple AREADEF lines, you probably need to create an AREAS.BBS from   
   > Mystic, and then use AREAFILE to point to that..   
      
   > 1) Create areas.bbs from Mystic, and remember where you created it.   
   > 2) Comment out all of your AREADEF lines in /this/ golded.cfg.   
   > 3) When all AREADEF lines are commented out: In the same golded.cfg:   
   >   
   > REAFILE AREASBBS /path/to/areas.bbs   
      
   HTH   
      
   David   
      
   --- GoldED+/W32-MSVC 1.1.5-b20180707   
    * Origin: Skyent BBS Colombia | telnet://bbs.skynetbbs.com:20023 (4:930/1)   
   SEEN-BY: 4/0 18/200 90/0 105/81 106/201 128/187 129/305 153/7715 218/700   
   SEEN-BY: 226/30 227/114 229/110 114 206 300 317 400 426 428 470 664   
   SEEN-BY: 229/700 705 266/512 280/464 282/1038 291/111 292/854 320/219   
   SEEN-BY: 322/757 341/66 342/200 396/45 460/58 633/280 712/848 900/0   
   SEEN-BY: 900/102 106 902/0 6 19 26 905/0 930/1 10   
   PATH: 930/1 902/26 229/426