TID: Mystic BBS 1.12 A48   
   REPLY: 1394.golded@1:154/700 2bb1b9a7   
   MSGID: 4:930/1 67506095   
   CHRS: CP437 2   
   TZUTC: -0500   
      
      Hello Nick!   
      
   01 Dec 24 09:18, you wrote to David Gonzalez:   
      
    NB> Hello David,   
      
    NB> On Sun, Dec 01 2024 07:29:33 -0600, you wrote ..   
      
    >> Have a look at my sig.   
      
    NB> Just so you have the correct terminology:   
      
    NB> Your /sig/ is "David"   
    NB> Your /tearline/ is "--- GoldED+/W32-MSVC 1.1.5-b20180707"   
    NB> Your /Origin/ is " * Origin: " and what follows it.   
      
    >> I did delete everything form my golded.cfg and recreated it with -   
    >> INSTALL, Origin shows and so does tearline, but origin is take from   
    >> goldareas.txt from mystic.   
      
    NB> That's great news! The bottom of your messages look much better now.   
    NB> Thank you.   
      
   Sure, looks better but still missing a tagline and some more info I would like   
   to put, but that'll do for now.   
      
    >> Noty sure how to have golded read the messagebase directly which I   
    >> know it's JAM but JAMPATH pointing to D:\BBS\MYSTIC\msgs does not   
    >> load any message base. So my solution here is to copy/paste all   
    >> AREADEFs to golded.cfg, dumb but is wat works for me ATM.   
      
    NB> The JAMPATH keyword is only for the location of echomail.jam and   
    NB> netmail.jam files, which you probably aren't using at this point. It   
    NB> has nothing to do with where your message bases are.   
      
    NB> If you'd like full access to your message bases, without having to do   
    NB> multiple AREADEF lines, you probably need to create an AREAS.BBS from   
    NB> Mystic, and then use AREAFILE to point to that..   
      
    NB> 1) Create areas.bbs from Mystic, and remember where you created it.   
    NB> 2) Comment out all of your AREADEF lines in /this/ golded.cfg.   
    NB> 3) When all AREADEF lines are commented out: In the same golded.cfg:   
      
    NB> AREAFILE AREASBBS /path/to/areas.bbs   
      
   Full path and file name, that might be where I'mm failing, mystic's areas.bbs   
   looks like this when I exported it:   
      
      
   !d:\bbs\mystic\msgs\localbbs localbbs   
   !d:\bbs\mystic\msgs\dupes LOC_DUPES   
   !d:\bbs\mystic\msgs\netmail netmail   
   !d:\bbs\mystic\msgs\fsxtst FSX_TST 21:3/100   
   ...   
   !d:\bbs\mystic\msgs\linux LINUX 4:902/26 4:930/1.10 4:930/10   
   !d:\bbs\mystic\msgs\internet INTERNET 4:902/26 4:930/1.10 4:930/10   
   !d:\bbs\mystic\msgs\canachat CANACHAT 4:902/26 4:930/1.10 4:930/10   
   !d:\bbs\mystic\msgs\rberrypi RBERRYPI 4:902/26 4:930/1.10 4:930/10   
      
      
    NB> Regards,   
    NB> Nick   
      
   Thanks will try and let yall know.   
      
   David   
      
      
   --- GoldED+/W32-MSVC 1.1.5-b20180707   
    * Origin: SkyNet BBS | Colombia | bbs.skynetbbs.com:20023 (4:930/1)   
   SEEN-BY: 4/0 18/200 90/0 105/81 106/201 128/187 129/305 153/7715 218/700   
   SEEN-BY: 226/30 227/114 229/110 114 206 300 317 400 426 428 470 664   
   SEEN-BY: 229/700 705 266/512 280/464 282/1038 291/111 292/854 320/219   
   SEEN-BY: 322/757 341/66 342/200 396/45 460/58 633/280 712/848 900/0   
   SEEN-BY: 900/102 106 902/0 6 19 26 905/0 930/1 10   
   PATH: 930/1 902/26 229/426