TID: Mystic BBS 1.12 A48   
   REPLY: 1385.golded@1:154/700 2baf1ab0   
   MSGID: 4:930/1 674c6569   
   CHRS: CP437 2   
   TZUTC: -0500   
      
      Hello Nick!   
      
   29 Nov 24 09:35, you wrote to David Gonzalez:   
      
   Have a look at my sig.   
      
   I did delete everything form my golded.cfg and recreated it with -INSTALL,   
   Origin shows and so does tearline, but origin is take from goldareas.txt from   
   mystic.   
      
   Noty sure how to have golded read the messagebase directly which I know it's   
   JAM but JAMPATH pointing to D:\BBS\MYSTIC\msgs does not load any message base.   
   So my solution here is to copy/paste all AREADEFs to golded.cfg, dumb but is   
   wat works for me ATM.   
      
   Cheers   
      
    NB> Hello David,   
      
    NB> On Fri, Nov 29 2024 08:41:18 -0600, you wrote:   
      
    >>> Something else I noticed. The TID kludge of this message shows   
    >>> you're using Mystic BBS's tosser. So at this point, I have no idea   
    >>> what you're trying to do here by accessing Synchronet message bases   
    >>> with Golded, and tossing with Mystic (this should absolutely not   
    >>> work seeing at the two softwares use completely different message   
    >>> base formats).   
      
    >> Yes!, you're correct but allow me to explain:   
      
    NB> That would have been nice to know much earlier!   
      
    >> - This is my working setup WIndows+Mystic+Golded, tat's why you see   
    >> mystic.   
      
    NB> While it may be working, it's not currently working /correctly/. Let's   
    NB> get *THIS* setup working correctly first, as that is the one you're   
    NB> using to post here currently.   
      
    >> I'm currently on the "production" node 4:930/1, the Linux   
    >> SBBS+GoldED is where I'm setting or trying to get a second node   
    >> working, sorry if this all confused people. Even though this Goldd   
    >> config also appears to have issues.   
      
    NB> Most definitely it confused everyone, and most definitely still has   
    NB> the same issues since the beginning, since you were modifying the   
    NB> wrong config file. THIS golded config needs to be modified to add your   
    NB> tearline and origin lines.   
      
    >>  NB> So it seems you're leaving some valuable information out,   
    >> unless you   
    >>  NB> have Mystic BBS software installed in /sbbs. If so, then you're   
    >> not   
    >>  NB> only confusing yourself, but everyone else, too. :(   
      
    >> Yes and my apologies *all* of what you've seen has come from my   
    >> Windwos+mystic+golded node, golded on linux is my side-node.   
      
    >> Many thanks and hope this clears the air a bit.   
      
    NB> Yeah, much clearer. That gets rid of Synchronet out of this entire   
    NB> equasion at the moment. Let's get /this/ one working first, then the   
    NB> other one accessing Synchronet will have completely different   
    NB> settings.   
      
    NB> Regards,   
    NB> Nick   
      
    NB> ... He who laughs last, thinks slowest.   
    NB> --- SBBSecho 3.23-Linux   
    NB>  * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin)   
    NB> (1:154/700)   
      
   David   
      
      
   --- GoldED+/W32-MSVC 1.1.5-b20180707   
    * Origin: SkyNet BBS | Colombia | bbs.skynetbbs.com:20023 (4:930/1)   
   SEEN-BY: 4/0 18/200 90/0 105/81 106/201 128/187 129/305 153/7715 218/700   
   SEEN-BY: 226/30 227/114 229/110 114 206 300 317 400 426 428 470 664   
   SEEN-BY: 229/700 266/512 280/464 282/1038 291/111 292/854 320/219   
   SEEN-BY: 322/757 341/66 342/200 396/45 460/58 633/280 712/848 900/0   
   SEEN-BY: 900/102 106 902/0 19 26 930/1 10   
   PATH: 930/1 902/26 229/426