TID: Mystic BBS 1.12 A48   
   REPLY: 1363.golded@1:154/700 2baa49f4   
   MSGID: 4:930/1 6745c675   
   PID: GED+W32 1.1.5-b20180707   
   CHRS: CP437 2   
   TZUTC: -0500   
      
      Hello Nicholas!   
      
   25 Nov 24 17:56, you wrote to me:   
      
    NB> Hello David,   
      
    NB> On Mon, Nov 25 2024 06:39:16 -0600, you wrote ..   
      
    >> NB> With that said, I'd be willing to guess you don't have 'luit'   
    >> NB> installed, either.   
      
    >> Guessing I do not, why?, well I based my install on the Git repo   
    >> instructions   
      
    NB> Because if you are putting something you would normally run on the   
    NB> command line in your Golded configuration file, people here should   
    NB> probably be aware you're not very knowledgeable in Linux so they can   
    NB> slow down a bit and explain things much more specific so you   
    NB> understand. You seem to be missing a LOT of valuable information, as   
    NB> well as where you should be looking for answers to most, if not all of   
    NB> your questions.   
      
    >> New... well, I don't consider myself new but I'm a self-proclaimed   
    >> expert, so yeah I might be missing some concepts.   
      
    NB> Thank you for letting the people trying to help you know that.   
      
    >> SEEN-BY: 4/0 90/0 103/705 104/119 120/616 124/5016 153/757 154/10 30   
    >> 50 700 SEEN-BY: 203/0 220/20 90 221/0 6 226/18 44 50 229/426   
    >> 240/1120 5832 280/464 SEEN-BY: 280/5003 5006 5555 292/854 8125 301/1   
    >> 310/31 341/66 234 396/45 SEEN-BY: 423/120 460/58 467/888 633/280   
    >> 712/848 770/1 900/0 102 106 902/0 19 SEEN-BY: 902/26 930/1 2320/105   
    >> 3634/12 5020/400   
      
    NB> You've also missed the fact that multiple people, including myself,   
    NB> have asked you multiple times to add a tearline and origin line via   
    NB> your config file in networked messages, so that the above lines don't   
    NB> display (ie they shouldn't, and wouldn't if you had the lines   
    NB> necessary).   
      
    NB> So, please put these two lines in your Golded config file:   
      
    NB> TEARLINE @longpid @version   
    NB> ORIGIN "This is an example origin line."   
      
    NB> In the quotes, you can put the name of your BBS or mailer, and maybe   
    NB> even some kind of connection information to it, like mine below.   
      
    NB> Regards,   
    NB> Nick   
      
   I paste my full config for gol;ded and still my origin and tearline are   
   missing    
   and this is windows version   
      
   USERNAME David Gonzalez   
   NICKNAME David G.   
      
   USEPID yes   
   EMPTYTEARLINE no   
      
   CTRLINFOECHO  TEARLINE, ORIGIN   
      
   /////////////////////////////////   
      
   // Your FTN-style address and akas.   
   ADDRESS 4:930/1         ; Fidonet Colombia   
   AKA             4:930/0         ; NC930   
   AKA             4:93/0          ; RC93   
   AKA     21:3/188    ; FSX Net.   
      
   // Your origin lines.   
   ORIGIN "Skyent BBS Colombia | telnet://bbs.skynetbbs.com:20023"   
   TEARLINE @longpid @version   
      
   NODELIST FSXNET.*   
   NODELIST NODELIST.*   
      
   // Scan these areas for personal mail. (Wildcards allowed).   
   AREAPMSCAN *   
   AREASCAN *   
   AREALISTSORT TGE   
   INCLUDE goldedareas.txt   
   DISPAREANO yes   
   WHOTO Todos   
   TEMPLATE GOLDED.TPL   
      
    On reading mode create SEMAPHORES FOR NETMAIL(F10) AND ECHOMAIL(F11)   
    Mystic (mis -server) constantly checks for these SEMAPHORES and will poll   
   uplinks   
    and send mail.   
   EXTERNUTIL 10 -PauseOnError   "echo a > D:\BBS\mystic\semaphore\netmail.out"   
   EXTERNUTIL 11 -PauseOnError   "echo a > D:\BBS\mystic\semaphore\echomail.out"   
    Whenever I exit ouy of GoldED and messages were written, SEMAPHORES are   
   created   
    and mail sent out   
   SEMAPHORE NETSCAN                       D:\BBS\mystic\semaphore\netmail.out   
   SEMAPHORE ECHOSCAN                      D:\BBS\mystic\semaphore\echomail.out   
   ===============================================================   
   ============== =========================================   
   DITSAVEUTIL 1 "P Save and send"   
      
      
   // Sort areas before scanning. The default is optimized for speed.   
   AREASCANSORT XZBE   
      
   // Start in a specific area, bypassing the arealist.   
   AREASTART fido_netmail   
      
   // Personal mail scan options.   
   PERSONALMAIL ALLNAMES             ; Scan with all your USERNAME's.   
   PERSONALMAIL STARTUP             ; Scan for personal mail at startup.   
   PERSONALMAIL STARTUP, ALLNAMES   ; Both.   
      
   JAMPATH    d:\bbs\mystic\msgs\   
      
   David   
   * Origin: SkyNet BBS (Manual add)   
   SEEN-BY: 902/26 930/1 10 341/66 900/106 902/19 280/464 229/426 900/102 4/0   
   SEEN-BY: 90/0 900/0 902/0   
   PATH: 930/1 902/26