REPLY: 4282.golded@1:103/705 2a4e09bb   
   MSGID: 1:104/117 65e8cb6b   
   CHRS: KOI8-R 2   
   TZUTC: -0700   
   TID: hpt/lnx 1.9 2022-07-03   
   Hello Rob.   
      
   06 Mar 24 11:24, you wrote to me:   
      
    >> BTW, make sure that Synchronet changes are actually there. I've   
    >> pushed them to master just today. You may need to pull from repo   
    >> again.   
      
    RS> I was using the "Synchronet" branch. I'll switch to master.   
      
   I see. Sounds good! Just wanted to make sure that you use correct code.   
      
    >>  RS> But running it (via SSH) doesn't output anything, just exits   
    >>  RS> immediately. 'gedlnx --help' same, nothing.   
    >>   
    >> Unfortunately there is a bug which hides usage message if no config   
    >> found. I've tried to fix it, but had to revert it back, because   
    >> correct fix is not that simple.   
    >>   
    >>  RS> So then I searched for documentation. golded.org appears down.   
    >>   
    >>  RS> I saw you have CMakeLists.txt, so I tried using that to build.   
    >> This   
    >>  RS> time, a lot fewer errors and it output some promising   
    >> binaries, but   
    >>  RS> again, running them produces no output:   
    >>   
    >>  RS> rswindell@git ~/golded-plus/out/golded3 (Synchronet) $ sudo   
    >> make   
    >>  RS> install [  4%] Built target uulib [  9%] Built target hunspell   
    >> [ 34%]   
    >>  RS> Built target gall [ 53%] Built target gcfg [ 60%] Built target   
    >> gcui [   
    >>  RS> 61%] Built target smblib [ 77%] Built target gmb3 [100%] Built   
    >> target   
    >>  RS> golded Install the project... -- Install configuration: "" --   
    >>  RS> Installing: /usr/local/bin/golded rswindell@git   
    >>  RS> ~/golded-plus/out/golded3 (Synchronet) $ golded rswindell@git   
    >>  RS> ~/golded-plus/out/golded3 (Synchronet) $   
    >>   
    >>  RS> Maybe I need to create or edit a config file or something? An   
    >> error   
    >>  RS> message or *some* kind of output from running 'golded' could   
    >> be   
    >>  RS> helpful.   
    >>   
    >> You have to have config file. You may start from simple config file   
    >> from   
    >> here:   
    >>   
    >> https://github.com/golded-plus/golded-plus/blob/master/cfgs/config/   
    >> simple.cf g   
    >>   
    >> And then uncomment this line:   
    >>   
    >> ;AREAFILE SBBS         R:\SBBS\                  ; Synchronet BBS   
    >> dir   
    >>   
    >> Set correct path to Synchronet directory. That shall do the trick.   
      
    RS> Okay, where does goled need to find this simple.cfg file? I assume I   
    RS> have to move or copy it somewhere that goled expects to find it.   
      
   It either look for it in current working directory or you may run it with   
   parameter -C. Like this:   
      
   ./gedlnx -C/path/to/config   
      
   Note that there is no space between -C and config file.   
      
   Vitaliy   
      
   ... 640K ought to be enough for anybody   
   --- GoldED+/LNX 1.1.5-b20240305-beta   
    * Origin: Aurora, Colorado (1:104/117)   
   SEEN-BY: 15/0 18/200 50/109 90/1 104/117 105/81 106/201 128/260 129/305   
   SEEN-BY: 135/225 153/7715 218/700 226/30 227/114 229/110 112 113 206   
   SEEN-BY: 229/307 317 400 426 428 470 664 700 266/512 280/464 5555   
   SEEN-BY: 282/1038 291/111 292/854 301/1 320/219 322/757 342/200 396/45   
   SEEN-BY: 460/16 58 256 1124 5858 463/68 467/888 633/280 712/848 3634/12   
   SEEN-BY: 5000/111 5001/100 5005/49 5015/46 5020/828 846 1042 4441   
   SEEN-BY: 5030/49 5054/8 30 5061/133 5075/128 5083/444 5090/958   
   PATH: 104/117 5020/1042 460/58 229/426