TZUTC: -0800   
   MSGID: 4282.golded@1:103/705 2a4e09bb   
   REPLY: 1:104/117 65e8a8aa   
   PID: Synchronet 3.20a-Win32 master/0eb08feed Mar  4 2024 MSC 1916   
   TID: SBBSecho 3.20-Linux master/20a1f829a Mar  5 2024 GCC 12.2.0   
   COLS: 80   
   BBSID: VERT   
   CHRS: CP437 2   
   NOTE: FSEditor.js v1.105   
     Re: Re: Synchronet config change   
     By: Vitaliy Aksyonov to Rob Swindell on Wed Mar 06 2024 10:31 am   
      
    > BTW, make sure that Synchronet changes are actually there. I've pushed them   
    > to master just today. You may need to pull   
    > from repo again.   
      
   I was using the "Synchronet" branch. I'll switch to master.   
      
    >  RS> But running it (via SSH) doesn't output anything, just exits   
    >  RS> immediately. 'gedlnx --help' same, nothing.   
    >   
    > Unfortunately there is a bug which hides usage message if no config found.   
    > I've tried to fix it, but had to revert it back, because correct fix is not   
    > that simple.   
    >   
    >  RS> So then I searched for documentation. golded.org appears down.   
    >   
    >  RS> I saw you have CMakeLists.txt, so I tried using that to build. This   
    >  RS> time, a lot fewer errors and it output some promising binaries, but   
    >  RS> again, running them produces no output:   
    >   
    >  RS> rswindell@git ~/golded-plus/out/golded3 (Synchronet) $ sudo make   
    >  RS> install [  4%] Built target uulib [  9%] Built target hunspell [ 34%]   
    >  RS> Built target gall [ 53%] Built target gcfg [ 60%] Built target gcui [   
    >  RS> 61%] Built target smblib [ 77%] Built target gmb3 [100%] Built target   
    >  RS> golded Install the project... -- Install configuration: "" --   
    >  RS> Installing: /usr/local/bin/golded rswindell@git   
    >  RS> ~/golded-plus/out/golded3 (Synchronet) $ golded rswindell@git   
    >  RS> ~/golded-plus/out/golded3 (Synchronet) $   
    >   
    >  RS> Maybe I need to create or edit a config file or something? An error   
    >  RS> message or *some* kind of output from running 'golded' could be   
    >  RS> helpful.   
    >   
    > You have to have config file. You may start from simple config file from   
    > here:   
    >   
    > https://github.com/golded-plus/golded-plus/blob/master/cfgs/config/simple.cf   
    > g   
    >   
    > And then uncomment this line:   
    >   
    > ;AREAFILE SBBS         R:\SBBS\                  ; Synchronet BBS dir   
    >   
    > Set correct path to Synchronet directory. That shall do the trick.   
      
   Okay, where does goled need to find this simple.cfg file? I assume I have to   
   move or copy it somewhere that goled expects to find it.   
   --    
                                               digital man (rob)   
      
   This Is Spinal Tap quote #32:   
   Derek Smalls: [A jog?] We don't have time for that.   
   Norco, CA WX: 62.0øF, 59.0% humidity, 1 mph SE wind, 0.00 inches rain/24hrs   
   --- SBBSecho 3.20-Linux   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 15/0 18/200 90/1 103/705 105/81 106/201 124/5016 128/260   
   SEEN-BY: 129/305 135/225 153/757 7715 154/10 30 203/0 218/700 221/0   
   SEEN-BY: 226/30 227/114 229/110 112 113 206 307 317 400 426 428 470   
   SEEN-BY: 229/664 700 240/1120 5832 266/512 280/464 5003 5555 282/1038   
   SEEN-BY: 291/111 292/854 8125 301/1 310/31 320/219 322/757 341/66   
   SEEN-BY: 341/234 342/200 396/45 423/120 460/16 58 256 1124 5858 467/888   
   SEEN-BY: 633/280 712/848 770/1 5020/400 1042 5054/30   
   PATH: 103/705 280/464 460/58 229/426