TZUTC: 0200   
   CHRS: CP850 2   
   MSGID: 2:301/123 60a0cfa8   
   REPLY: 2:423/39 60a0a0c4   
      
      Hello Karel!   
      
   16 May 21 06:28, you wrote to me:   
      
    FS>> I use *.msg for Netmail and "personal mail" (FMail copies   
    FS>> Echomail addressed to me there), then three areas only in Hudson   
    FS>> format (Bad, Dupes and Recovery - also apparently the FMail way   
    FS>> to create those areas). The rest are JAM format. But thanks for   
    FS>> the advice, I'll definitely look into this.   
    KK> I have similar setup (just - instead of fmail using crashmail and -   
    KK> using linux ;-) and Golded can live with tosser touching JAM and msg   
    KK> on the background. For example: reading echo, tosser add messages,   
    KK> tells Golded to rescan via flag, and I see new message immediately (no   
    KK> visible locking). But - not tested to "write" or better to say "save"   
    KK> message during tossing. Due to the very short timing - is very hard to   
    KK> even simulate.   
      
   I remember when tossing messages and compiling the nodelist (Goldnode) would   
   take a noticeable amount of time. It was quite a pleasant shock how fast this   
   software runs on modern hardware.   
      
   I'll look into the "flags" thing, thanks! I usually have a "tail" window of   
   BinkD running and see if something comes in, then just use "Alt"+"S" to   
   rescan. But why do something manually if the system works for you...   
      
   Regards   
   Fermin   
      
      
   ... I'm too sexy for this Tagline.   
   --- GoldED+/W64-MSVC 1.1.5-b20180707   
    * Origin: USS Ferminator - Unteraegeri, Switzerland (2:301/123)   
   SEEN-BY: 1/123 18/200 30/0 90/1 105/81 120/340 123/131 129/305 221/1   
   SEEN-BY: 221/6 226/30 227/114 229/101 424 426 452 664 700 1016 1017   
   SEEN-BY: 240/1120 5832 249/206 317 400 280/464 282/1038 292/854 301/0   
   SEEN-BY: 301/1 101 103 113 123 812 317/3 322/757 342/200 633/280 5058/104   
   PATH: 301/123 1 229/426