On 06/10/17, Wilfred van Velzen pondered and said...   
       
    Wv> Probably. If you have defined or use some hudson areas, and messages end   
    Wv> up in them, you are bound to run out of space at some point in time.   
    Wv> Of course you can automate things by running the FTools commands in a   
    Wv> periodic maintenance batch job. I'm running 'FToolsW32.exe MAINT /D /N   
    Wv> /O /P' every night...   
      
   I'm running this at the moment every night but that's not addressing the   
   issue it would seem.   
      
   [snip]   
      
   1:03.928  Maint /D /N /O /P /R   
   23:51:03.928  Processing hudson message base   
   23:51:03.944  Deleted     : 0 msgs   
   23:51:04.115  Space saved (Hudson) : 0 bytes   
   23:51:04.115  Processing jam area: ALT.BBS   
   23:51:04.147  Processing jam area: ALT.BBS.ADS   
   23:51:04.225  Processing jam area: ALT.BBS.ALLSYSOP   
   23:51:04.240  Processing jam area: ALT.BBS.AMIGA.CNET   
   23:51:04.271  Processing jam area: ALT.BBS.DOORS   
      
   [snip]   
      
   23:53:24.484  Processing jam area: UK.TECH.BROADCAST   
   23:53:24.562  Space saved (JAM) : 8766614 bytes   
   23:53:24.562  Maint Active: 140.634 sec.   
      
   [snip]   
      
      
   I don't have any bad, dupe or recovery boards defined, only a netmail board   
   which is number 1, I think this is the only hudson base.   
      
   I'm unsure how to access the netmail base to clear it / inspect it.   
      
   Will keep pondering... fair to say my attention is divided at the momemt so   
   have not looked at this setup too closely    
      
   --- Mystic BBS v1.12 A33 (Windows/32)   
    * Origin: Agency BBS | telnet://agency.bbs.geek.nz (3:770/100)