-=> Sneaky wrote to Bill McGarrity <=-   
      
    Sn>   Re: Re: Help with sbbsecho wi   
    Sn>   By: Bill McGarrity to Ian Segers on Sat Feb 27 2016 19:37:00   
      
    > -=> Ian Segers wrote to Bill McGarrity <=-   
    >   
    >   
    >   
    >  DM> Sounds to me, from your description, like the problem is on the hub's   
    >  DM> end. But I don't know what an "e-mail inbound dir about log" is, so I'm   
    >  DM> just guessing.   
    >   
    >  BM> Wonder if he has IRex set for *.MSG mailer rather than Binkley and as   
    >  BM> soon as it sees the *.MSG in the netmail folder before sbbsecho changes   
    >  BM> it to a .*lo file in the outbound, IRex sends it without the .pkt.   
    >   
    >  BM> Just a guess....   
    >   
    >   
    >  IS> I have my mailer option in irex set as :frontdoor 2.25 /type of MSGs :   
    >  IS> opus 1.02/   
    >  IS> save inboud mail in : type 2+ packet.   
    >   
    >  IS> don't now if that will help you help me with the problem   
    >   
    >  IS> Thank you for the help   
    >   
    > OK.... two things you need to check.  First, being your using "file attach",   
    > you're also going to have to make sure sbbsecho is tossing it as file attach   
    > and not Binkley/FLO. Secondly, change MSG Type in IRex to FTS-0001.  I know   
    > when I was running IRex that was my setting and had zero issues.  Try these   
    > things first and let's see if it takes care of your issues.   
      
    Sn>  Hello Bill   
      
    Sn> Thank you for getting back to me about this   
      
    Sn> I had a look in sbbsecho.cfg amd the mailer is frontdoor/attach.   
      
    Sn> I have changed the msg type to FTS-0001   
      
    Sn> the file attack, is there any other place in sbbs I sould be looking   
    Sn> at.   
      
   Only other thing I can think of is to make sure in your areas.bbs the correct   
   uplink is specified for each echo area.  That will tell sbbsecho who to create   
   the PKT for and generate a *.MSG to that address.   
      
    Sn> I give that a shot and let you now   
      
   Can you look in your Irex log and see if indeed pkt's are being sent to your   
   hub.  If so, then it seems you have everything configured correctly on his end.   
    IF your uplink is a hub to more than one network, his inbound folder should be   
   the same for all networks. His tosser will see the headers an put them in the   
   correct echoareas. If I can remember correctly you said he had a separate   
   folders with an extension.. like.. ../inbound.xxx.  Really shouldn't be that   
   way unless he is running different tossers for different networks.  Inbound, at   
   least on my system, should only be one folder.  If you're operating FileAttach,   
   then you'll only need one outboud as well.  Binkley/FLO will have individual   
   outbound folders for each zone. sbbsecho will create the proper files and   
   deposit them in the proper folders.    
      
   Good luck...   
      
      
      
    Sn> Thank you for your help with this   
      
      
   --   
      
   Bill   
      
   Telnet: tequilamockingbirdonline.net   
   Web: bbs.tequilamockingbirdonline.net   
   FTP: ftp.tequilamockingbirdonline.net:2121   
   IRC: irc.tequilamockingbirdonline.net Ports: 6661-6670 SSL: +6697   
   Radio: radio.tequilamockingbirdonline.net:8010/live   
      
      
   ... Look Twice... Save a Life!!! Motorcycles are Everywhere!!!   
   --- MultiMail/Win32 v0.50   
    * Origin: TequilaMockingbird Online - Toms River, NJ (1:266/404)