PID: EleBBS/W32 v20130208.d   
   MSGID: 1:340/1101 0115c0f2   
   REPLY: 1:154/10 68fea727   
   NOTE: IceEdit 2.35 K96741   
   TID: FastEcho 1.46.1 43288   
      
   * In a message originally to Martin Kazmaier, Nick Boel said:   
      
    > Hey Martin!   
      
    > On Sun, 26 Oct 2025 13:12:00 , you wrote:   
      
    >  > Scanning JAM areas ...   
      
    >  > Can't export message in area HNET_TEST without active downlinks.   
      
    >  > Scanning Squish areas ...   
      
      
    >  > NetMail: 0, EchoMail: 0   
      
    >  > I've got node, seen-by and export set.  What could I be doing wrong?   
    >  > I've had this before and I have no clue what I did to fix it...   
      
    > Well, I don't know much about fastecho, but the error says you can't   
    > /export/ message in area HNET_TEST without /active downlinks/.   
      
    > So, I would imagine, if you don't have any active downlinks for that area,   
    > you don't need to export anything for it (ie: unset export, since you said   
    > you set it).   
      
   Export to is set, and that's the downlinks.  Turns out I think it was a VM   
   error.  I'd changed some settings, but they hadn't taken effect.   
      
   --   
   Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,   
   ,wss) (Ports 22,23,110,21,119,999)   
      
      
   ---   
    * Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (1:340/1101)   
   SEEN-BY: 105/81 106/201 128/10 187 129/14 305 153/7715 154/110 218/700   
   SEEN-BY: 226/30 227/114 229/110 206 317 400 426 428 470 664 700 705   
   SEEN-BY: 266/512 291/111 292/854 300/6 320/219 322/757 340/0 101 400   
   SEEN-BY: 340/800 1100 1101 342/200 396/45 60 460/58 633/280 712/848   
   SEEN-BY: 902/26 5075/35   
   PATH: 340/1101 400 128/187 229/426