On 04/06/18, Joaquim Homrighausen said the following...   
       
    JH>  * On Tue 27 Mar 2018 13.13,  wrote:   
    JH>    
    JH>  ij> Here's the problerm though.... when In go to use the terminal,   
    JH>  ij> or the mailer... but in the terminal program if I try to dial   
    JH>  ij> out with the use of ALT-D or P ... call from the nodelist or   
    JH>  ij> phone book... I get an error message and it doesn't dial...   
    JH>  ij> or if it does dial it'll dial 4 or so number, of an 11 number   
    JH>  ij> dial and not connect obviously.   
    JH>    
    JH> Just a silly question ... there's a manual dial function in the Terminal,   
    JH> , does it work if you try that?   
    JH>    
      
   No it wasn't a silly question...   
      
   If I try to dial a number in FD terminal using alt-P, alt-d or now alt-m it   
   doesn't dial ... I get a modem error.... when I say error I mean FD shows a   
   dialog box that says modem error.... then it starts the 10 second clock to   
   repeat this problem.  If I put the modem speaker on I can hear it dial a few   
   numbers, 11 being the magic amount of numbers, and the attempt fails...   
      
   NOW....   
   if I'm in the terminal window and manually type the numbers in... ATDT(then   
   the number) hit enter it dials the number and connects.   
      
   Hmmmmm....   
      
   I may start looking at the fossil I'm using, I'm currently using X00, the one   
   that came with my version of FD...   
      
   There you go... explained better I think.   
      
   IB JOE   
   AKA Joe Schweier   
   SysOp of Joe's Computer & BBS   
   Telnet: joesbbs.com   
      
   --- Mystic BBS v1.12 A35 (Raspberry Pi/32)   
    * Origin: Joe's Computer & BBS -=joesbbs.com=- (1:342/200)