Date: Thu, 02 Feb 2006 11:55:49 -0400   
   From: ROLF KNOBEL   
   To: HECTOR SANTOS   
   Subject: Re: CGI not working   
   Newsgroups: winserver.public.gamma.testing   
   Message-ID: <1138899349.40.1138743155@winserver.com>   
   References:  <1138743155.40.1138735738@winserver.com>   
   X-WcMsg-Attr: Rcvd   
   X-Mailer: Wildcat! Interactive Net Server v7.0.454.5   
   Lines: 99   
      
   My https.dll: 2006-01-31  05:33p (the new gamma), the same result, the CGI    
   doesn't work.   
   I tested it with 451.5 and see that it's the same problem. Now I restored an    
   old backup from 454.4 to test it and the CGI are working. Didn't you change    
   anything in the 451.5 update with PHP and CGI? Possibly this has something    
   to do with it.   
      
   My ActivePerl version: 5.6.1 Build 635   
      
   Perl scripts from a DOS prompt are working, the SpamAssassin from    
   wsSpamGuard too.    
      
   Rolf   
      
      
   On 1/31/06 4:23 PM, HECTOR SANTOS wrote to ROLF KNOBEL:   
      
   -> Hmmmm,   
   ->    
   -> I copied and pasted this a ROLF.PL file   
   ->    
   -> ------------- cut here -----------   
   -> print "Environment Variables";   
   -> print "";   
   -> while(($key,$val) = each(ENV))   
   -> {   
   ->  print "$key: $val \n";   
   -> }   
   -> print "";   
   -> ------------- cut here -----------   
   ->    
   -> and it into my CGI bin directory.   
   ->    
   -> I started my browser, logged in and type:   
   ->    
   ->     /cgi/rolf.pl   
   ->    
   -> and it spit out the entire environment.   
   ->    
   -> I'm using the latest GAMMA AUP.  I ran the GAMMA AUP to make sure. The   
   -> important dll is:   
   ->    
   ->     2005-12-17  06:54p             555,284 wchttps.dll   
   ->    
   -> and by the date of it, that hasn't changed since the initial gamma   
   -> release back in December.   
   ->    
   -> Hope you can help find out whats going on there.   
   ->    
   -> Oh, I have a very old ActivePerl.....2001 version.   
   ->    
   -> ????   
   ->    
   -> ----   
   ->    
   ->    
   ->    
   ->    
   ->    
   ->    
   ->    
   ->    
   ->    
   ->    
   ->    
   ->    
   ->  wrote in message    
   news:1138735738.40.0@winserver.com...   
   -> > Hi   
   -> >   
   -> > I have a few Perl CGI running on my site. I did the Gamma AUP and   
   -> they're   
   -> > not working anymore.   
   -> >   
   -> > I tested it with a small script test.cgi:   
   -> >   
   -> > print "Environment Variables";   
   -> > print "";   
   -> > while(($key,$val) = each(ENV))   
   -> > {   
   -> >  print "$key: $val \n";   
   -> > }   
   -> > print "";   
   -> >   
   -> > Normally it would list all environment variables but now it's an empty   
   -> display.   
   -> > If I look at the page source (the blank page, I replaced the brackets   
   -> with []):   
   -> >   
   -> > [!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"]   
   -> > [HTML][HEAD]   
   -> > [META http-equiv=Content-Type content="text/html; charset=windows-   
   -> > 1252"][/HEAD]   
   -> > [BODY][/BODY][/HTML]   
   -> >   
   -> > That's all. And this is for all CGI I have on my site.   
   ->    
      
       
   --- Platinum Xpress/Win/WINServer v3.1   
    * Origin: Prison Board BBS Mesquite Tx  //telnet.RDFIG.NET www. (1:124/5013)