* From  : Marc Carrano   
   * To    : Shawn Highfield   
   * About : Re: net2bbs/netfoss   
   * On    : Jul 09 2011, At 18:39:00   
      
   Hi Marc,   
      
    MC> I have a couple of questions   
      
    MC> 1. what version of Ezycom do I download for the full install   
      
      
   v2.00 is the full release.  You are welcome to stay on v2.00 until the   
   next full release, or you can upgrade to the Gamma versions. If you   
   choose to upgrade to the gamma versions, you must follow the   
   instructions included with each gamma version. The instructions can be   
   found in the included WHATSNEW file.   
      
    MC> 2. do I just use AT%DT for the modom Int?   
      
   This is my setup - worked fine when I had dialup...   
      
   Comport                 : 1   
   Maximum Baud Rate       : 38400   
   Locked Port             : Yes   
   Lower DTR when BUSY     : No   
   Off Hook                : Yes   
   Init Response           : OK   
   Ring String             : RING   
   Modem Delay             : 50   
   Force Answer            : Yes   
   Answer Delay (1/10s)    : 50   
   Start Time              : 00:00   
   End   Time              : 00:00   
   Init Tries              : 1   
   Init String 1           : ATZ|   
   Init String 2           : [UnUsed]   
   Set Busy String         : ATH1|   
   Manual Answer String    : ATA|   
   No Carrier String       : NO CARRIER   
   Fax Connect String      : FAX   
   Send BREAK to Modem     : No   
      
      
   Hope this helps...   
      
   Cheers ...   
      
   ... "Happy DeathDay to Rimmer!" -- Lister, The Cat, and Holly   
   --- Ezycom V2.15g3 01FB0256   
    * Origin: CPBBS * Telnet://ezycom.sytes.net * 2k4-57k6 Baud. (1:229/452.682)