TID: Mystic BBS 1.12 A48   
   MSGID: 1:154/154 ab18eafd   
   REPLY: 2:230/0 61c3e1af   
   TZUTC: -0500   
   I never actually used this in FreeDos, but it should work none the less -   
      
   Make sure you have the DOS drivers for your ethernet card. Once oyou install   
   them, make sure to take note of the software interrupt number (I believe for   
   network cards, it is 0x60 - atleast that is what it is for my Xircom PE3). You   
   will need to supply this number to your TCP stack.   
      
   Microsoft Network Manager may work on FreeDOS, but I have never tried it. I   
   would recommend MTCP as it is newer. When you configure MTCP, you will need to   
   know the interrupt number of your ethernet driver.    
      
   MTCP should have documentation to walk you through configuring it. Sorry I   
   can't help much further.   
      
   KG7UJH   
      
   How ya gonna do it? PS/2 it!   
      
   --- Mystic BBS v1.12 A48 2022/02/11 (Linux/64)   
    * Origin: SPOT BBS / k9zw (1:154/154)   
   SEEN-BY: 1/123 14/0 15/0 90/1 105/81 106/201 114/705 709 120/340 123/120   
   SEEN-BY: 123/131 129/305 330 331 153/802 7715 154/154 218/700 226/30   
   SEEN-BY: 227/114 229/110 111 112 113 206 317 400 424 426 428 470 664   
   SEEN-BY: 229/700 266/512 282/1038 298/25 27 28 30 33 34 35 305/3 317/3   
   SEEN-BY: 320/219 322/757 342/200 396/45 460/58 633/280 712/848   
   PATH: 154/154 298/25 317/3 229/426