Date: Wed, 17 Jun 2015 21:11:46 -0400   
   From: CRAIG STRUTT   
   To: ALL   
   Subject: RE: WSMTP TLS 10060 Timeout   
   Newsgroups: win.server.program   
   Message-ID: <1434589906.32.1434558367@winserver.com>   
   References:  <1434558367.32.0@winserver.com>   
   X-Mailer: Wildcat! Interactive Net Server v7.0.454.5   
   Lines: 67   
      
   Additional information.   The timeouts occur exactly 3 minutes after    
   the SSL connection is made.   I've checked the ini file for WCSSL and    
   wcsmtp has a 5 minute default timeout.   I've moved it up to 10    
   minutes.   I'm wondering where else there is a 3 minute or 180 second    
   timeout that can be increased.  I can't seem to find one.   
      
   On 6/17/2015 12:26 PM, CRAIG STRUTT wrote to ALL:   
      
   -> Ever since I turned on SSL/TLS I have begun to have timeout errors    
   on    
   -> receiving messages from some sources.   Here is the log from one.   
   -> ****************************************************   
   -> Wildcat! SMTP Server v6.2.452.2   
   -> SMTP log started at Tue, 16 Jun 2015  21:58:40   
   -> Connection Time: 20150616 21:58:40  cid: 00000DFE   
   -> SSL Enabled: YES   
   -> Client IP: 108.174.3.194 (unknown)   
   -> 21:58:40 S: 220 icsbbs.com Wildcat! ESMTP Server v6.2.452.2 ready   
   -> 21:58:40 C: EHLO maile-ab.linkedin.com   
   -> 21:58:40 S: 250-icsbbs.com, Pleased to meet you.   
   -> 21:58:40 S: 250-SUBMITTER   
   -> 21:58:40 S: 250-ETRN   
   -> 21:58:40 S: 250-AUTH CRAM-MD5 LOGIN PLAIN PLAIN-MD5 SHA-1   
   -> 21:58:40 S: 250-AUTH=LOGIN   
   -> 21:58:40 S: 250-HELP   
   -> 21:58:40 S: 250 STARTTLS   
   -> 21:58:41 C: STARTTLS   
   -> 21:58:41 S: 220 Ready to start TLS   
   -> 21:58:41 ** Begin SSL negotiation   
   -> 21:58:41 ** SSL negotiation successful   
   -> 21:58:41 C: EHLO maile-ab.linkedin.com   
   -> 21:58:41 S: 250-icsbbs.com, Pleased to meet you.   
   -> 21:58:41 S: 250-SUBMITTER   
   -> 21:58:41 S: 250-ETRN   
   -> 21:58:41 S: 250-AUTH CRAM-MD5 LOGIN PLAIN PLAIN-MD5 SHA-1   
   -> 21:58:41 S: 250-AUTH=LOGIN   
   -> 21:58:41 S: 250 HELP   
   -> 21:58:41 C: MAIL FROM:    
   2h842osvhoqemo2jjgianlrqvp0aqmerrpajn7oj586ty3xezrbvbsqf@bounce.linkedi   
   -> n.com>   
   -> 21:58:41 S: 250     
   2h842osvhoqemo2jjgianlrqvp0aqmerrpajn7oj586ty3xezrbvbsqf@bounce.linkedi   
   -> n.com>... Sender validation pending. Continue.   
   -> 21:58:41 C: RCPT TO:   
   -> 21:58:42 ** WCX Process: wcsap  ret: -1   
   -> 21:58:42 S: 250 <********@*********.com>... Recipient ok   
   -> 21:58:42 C: DATA   
   -> 21:58:42 S: 354 Start mail input; end with .   
   -> 22:06:43 S: 421 Idle Timeout - Server closing transmission channel.   
   -> 22:06:43 ** Completed   
   -> ******************************************************************   
   -> And in the non-verbose log I get things like this:   
   -> ******************************************************************   
   -> 20150617 10:45:15 (1478) error 10060 : connection timeout receiving    
   -> data from remote . total received: 24560   
   -> ******************************************************************   
   ->    
   -> Does my processor not have enough power, or is there something else    
   -> going on?   I obviously would like to leave encryption on, but I    
   need    
   -> to be sure that all mail can come in.    
   ->    
   -> Spam influx has been terrible lately.   
   ->     
       
   --- Platinum Xpress/Win/WINServer v3.1   
    * Origin: Prison Board BBS Mesquite Tx  //telnet.RDFIG.NET www. (1:124/5013)