>> What does a 12" Kline spud wrench go for up you way?   
      
    NB> Depends on the size. A standard 1 1/4" spud used for 3/4" bolts is right   
    NB> around   
    NB> $40. My entire tool belt without harness is probably around $300. That's   
    NB> not   
    NB> including my welding gear, or my tool bucket for layout/fabrication.   
      
      
   Had a 50 Cal. ammo can full of small hand tools, Kline nut drivers, and    
   linesman's pliers, Stanley wrenches, chisels, tape measures.   
   good tap & die set, dividers...  Lifted off the back of the truck   
   while I had lunch.   
      
   Cost about 800 bucks just to replace those. Good tools are not cheep.   
      
   --- Mozilla/5.0 (Windows NT 6.1; WOW64; rv:13.0) Gecko/20120614 Thunderbird/13.   
    * Origin: Fidonet Via Newsreader - http://www.easternstar.info (1:123/789.0)