MSGID: 1:129/305 90045822   
   TID: GE 1.2   
   NA> Is the CD indicator "grey" on the modem status bar when D'Bridge starts up   
      
   Yep   
      
   NA> mailer determines a connection is established. Either make sure &C1 is par   
      
   I put a new init string in othermdm.mcf and got something like could not init    
   the modem in the log screen.   
   I reverted the file and get the issue where dbridge loads goes to swap and I    
   get that runtime error.   
      
   After playing around for a few I figured this much out..   
      
   Dbridge will loadup fine and swap to Iq fine (IF) you load nothing but the   
   packetdriver X00 and RlFossil however with the modem unconfigured :|   
      
   With the modem configured you must have only the three things loaded up and    
   load iniquity with rlfossil 1st let it init the modem then quit and load    
   D'bridge. if you don't do that 1st you get that CD indicator seems like before   
   DB has even had time to init the modem with &C1   
      
   Oh the good news is it works now just have to figure out this one issue or    
   make a script to somehow init the modem before loading d'bridge.   
      
   othermdm.mcf has MCF 10009600   
                    BAUD 9600   
                    LOCKED   
                    DELAY 40   
                    PREINIT ATM0Q0V1X4&C1&D2   
                    INIT v~~^~~ATS0=0H0   
   &etc    
      
   -lux   
      
   --- Renegade v1.25/DOS   
    * Origin: The Titantic BBS Telnet - ttb.rgbbs.info (1:129/305)   
   SEEN-BY: 1/123 14/0 90/1 105/81 114/709 120/340 123/131 129/305 226/30   
   SEEN-BY: 227/114 702 229/101 424 426 428 550 700 1016 1017 240/5832   
   SEEN-BY: 249/1 206 317 400 282/1038 292/854 301/1 317/3 322/757 342/200   
   SEEN-BY: 633/280   
   PATH: 129/305 229/426