MSGID: 1:229/426 0DF5662E   
   TZUTC: -0500   
       ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ   
         ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ   
         Û    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    Û   
         ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ    ÛÍÍÍÍÛ   
         Û    ÛÍÍÍÍÛ                                  ÛÍÍÍÍÛ    Û   
         ÛÍÍÍÍÛ                                            ÛÍÍÍÍÛ   
         Û                 D'Bridge EMAIL System                Û   
                    Copyright (c) by Nick J. Andre, Ltd.   
                            www.dbridgemailer.com   
      
   VERSION 4 - NOVEMBER 15 2019   
   ----------------------------   
      
   - Moving on to version 4... for Roger.   
      
   - Tossing performance should be a bit faster now, due to less disk-writes   
     and new cache code written from scratch that stores the most frequently-   
     tossed Echomail areas in memory. On modern computers you may not notice   
     the change, but on any legacy/old systems you should see an improvement,   
     especially when running on a "real" MS-DOS computer.   
      
   - Two new semaphores: DBNOTOSS.X and DBNOECHO.X, with X being the line   
     number, ie. DBNOTOSS.1 for line 1 (or for single-line usage). Each   
     will tell D'Bridge not to activate tossing or Echomail scanning; basically   
     disabling the mail-tosser until the semaphore is erased; assuming in   
     some sort of batch file for your system.   
      
     On most systems, you would use DBNOTOSS.1 or DBNOECHO.1 as the filenames.   
      
     Note that pending Echomail forwarding/scanning and any Xmail "Compress"   
     operations will finish first before the mail tosser is disabled by the   
     semaphore.   
      
   - A reminder, that if the above is not quite what you want, the semaphore   
     DBRIDGE.PTM (Processing/Tossing Mail) is created whenever D'Bridge is   
     busy tossing mail. The semaphore is erased when finished. Your own batch   
     files or scripts could check for this although you will want to use   
     some sort of "sleep" command or timeout between checking, ie:   
      
                    :AreWeTossingMail   
                    if exist dbridge.ptm timeout 60   
                    if exist dbridge.ptm goto AreWeTossingMail   
      
     In this example, the batch file waits 60 seconds between checks (on   
     most Windows computers)   
      
   - Rewrote some of the file I/O handler routines.   
      
   - Slight rewording in the Queue/View command.   
      
   - Slightly changed the command-line parameters to allow a specific line   
     to be specified while starting the Terminal.   
      
   - Slight adjustments to memory and buffer allocation for MS-DOS computers.   
      
   - A minor fix when debugging processed mail packets.   
      
   - Slightly updated help screens.   
      
   - A fix for long messages in the internal editor in VGA mode.   
      
   Nick Andre   
   www.dbridgemailer.com   
      
   --- Renegade vY2Ka2   
    * Origin: Joey, do you like movies about gladiators? (1:229/426)