NA> The method is correct. At this time, counting is not supported.   
   NA>    
   NA> The Areafix system in D'Bridge is not as elaborate as in other tossers.   
   NA>    
   NA> Its really up to the D'Bridge system in question as to whether Rescans   
   NA> are supported or not. This can be an option toggle, an Echomail security   
   NA> policy or the system may not have its message databases/files set in a   
   NA> way to allow it.   
   NA>    
   NA> If you feel absolutely sure the system in question should be sending   
   NA> rescans,   
   NA> or it has done so in the past, let me know.   
      
   Didn't want to go off topic here and talk about rescans.. :)   
      
   The system in question is my D'Bridge hub.  I have been trying to trouble   
   shoot this but have run out of ideas.  Rescan used to work, but I did notice   
   one thing that didn't seem right.   
      
   Under echomail areas, the rescan option was always (default) set to "0".  That   
   is supposed to mean unlimited messages allowed in the rescan.  When you set it   
   to "0" now, it says "None" like it is disabled.     
      
   I originally thought that was the problem, so I edited all echos (using   
   Notepad++) to Rescan: 9998 (the highest number allowed).  Apparently that   
   didn't get it processing, either.     
      
   Any tips appreciated.  It could be that I just need to troubleshoot this after   
   having a few Budweisers.   
      
   Thanks.   
      
   - Mark   
      
   --- WWIVToss v.1.52    
    * Origin:  http://www.weather-station.org * Bel Air, MD -USA (1:261/1304.0)