Hello Roger,   
      
   On Thu Jan 12 2017 06:51:22, Roger Nelson wrote to Benny Pedersen:   
      
    BP>> NA> I know Benny and Alexey keep pestering me for a Linux   
    BP>> version...   
      
    BP>> atleast a raspberry pi version would do, remember it have its boot   
    BP>> on fat   
    BP>> :=)   
      
    RN> Does anyone have their drives formatted FAT anymore or is that because   
    RN> it raspberry pi?   
      
   The only thing you need FAT32 on a Raspberry Pi for is the boot partition. I   
   have 100M allocated for this, and the rest of the drive is an ext4 Linux   
   partition..   
      
   Device         Boot  Start       End   Sectors  Size Id Type   
   /dev/mmcblk0p1        2048    206847    204800  100M  c W95 FAT32 (LBA)   
   /dev/mmcblk0p2      206848 249737215 249530368  119G 83 Linux   
      
   D'Bridge wouldn't need to know or have anything to do with a FAT partition   
   whatsoever. It just needs to be able to compile on ARM devices, is all.   
      
   I guess I'm just completely clueless as to why you even brought up FAT   
   partitions and what it has to do with D'Bridge working on a Raspberry Pi.. ?   
      
   Regards,   
   Nick   
      
   ... "Не знаю. Я здесь только работаю."   
   --- GoldED+/LNX 1.1.5-b20161221   
    * Origin: thePharcyde_ distribution system (Wisconsin) (1:154/10)