TID: Mystic BBS 1.12 A46   
   MSGID: 1:387/26 e7876a3c   
   REPLY: 1084.clascomp@1:2320/105 26779f6f   
   TZUTC: -0600   
   On 20 Feb 2022, Mike Powell said the following...   
    MP> I think I would need to start out with a learn-to-solder kit before   
    MP> moving up to these kits.  :)  Look forward to reading about some of your   
    MP> building adventures here.   
      
   This weekend being a long one here in the US, I think I'm either going to   
   work on an 1802 "COSMAC" kit or an "Altaid" kit. Both were purchased from Lee   
   Hart, and the first step is checking that I have all of the parts, which I   
   believe I do.   
      
   I have built one of Lee's kits previously, the Z80 Membership Card, but I   
   took a little bit different route this time. For the Z80 kit, I bought the   
   whole kit including all of the needed parts. For the 1802 and Altaid kits, I   
   decided to source most of the parts myself. I strongly regret that decision   
   and would very much recommend against it. Lee has all of the parts at his   
   disposal and tracking them all down myself was a huge pain in the backside.   
      
   Jeff.   
      
   --- Mystic BBS v1.12 A46 2020/08/26 (Raspberry Pi/32)   
    * Origin: Cold War Computing BBS (1:387/26)   
   SEEN-BY: 1/123 15/0 18/200 19/38 50 90/1 105/81 106/201 633 987 120/340   
   SEEN-BY: 123/131 124/5014 5016 129/305 330 331 153/7715 154/10 226/30   
   SEEN-BY: 227/114 229/110 206 317 400 424 426 428 452 664 700 240/5832   
   SEEN-BY: 266/512 280/464 282/1038 292/854 301/1 317/3 320/219 322/757   
   SEEN-BY: 342/200 387/25 26 28 396/45 460/58 633/280 712/848   
   PATH: 387/26 396/45 229/426