TID: FMail-lnx64 2.1.0.18-B20170815   
   RFC-X-No-Archive: Yes   
   TZUTC: 0100   
   CHRS: UTF-8 2   
   PID: GED+LNX 1.1.5-b20161221   
   MSGID: 2:280/464 5fc7ae6f   
   REPLY: 1:153/757.26 9d15c78c   
   Hi Charles,   
      
   On 2020-12-02 14:32:44, you wrote to me:   
      
    Wv>> That's difficult for a point! You need a different point number for   
    Wv>> each link, and need to keep the configs separate, and read "all"   
    Wv>> echomail areas in each setup... Which wouldn't be practical.   
      
    CP> In theory it would be possible, but yes cumbersome. I'm not sure   
    CP> exactly how it would work. Either seperate Message groups for each   
    CP> point connection, or one Group for all Fido points.  If one Group, I   
    CP> suppose the outbound would be defaulted to whichever point was setup   
    CP> first. But I'm not sure if it would cause duplicate messages.   
      
   As a point you can't route mail. So you have to make sure that incoming   
   messages on 1 link aren't send out on the other. And if you write a message   
   yourself you have to make sure it only goes out on 1 connection, otherwise you   
   would send out dupes which have different origin pointnumbers, which probably   
   makes them difficult as dupes, which would be annoying. So probably not easy   
   to configure in most tossers (if at all possible).   
      
   Bye, Wilfred.   
      
   --- FMail-lnx64 2.1.0.18-B20170815   
    * Origin: FMail development HQ (2:280/464)   
   SEEN-BY: 103/705 105/81 124/5016 129/305 153/757 203/0 221/0 1 6 360   
   SEEN-BY: 229/426 664 700 240/5832 280/464 282/1038 292/8125 301/1   
   SEEN-BY: 310/31 322/757 335/364 396/45 423/81 120 460/58 4500/1   
   PATH: 280/464 221/1 6 153/757 229/664 426