MSGID: 2:335/206 659ad04f   
   PID: FidoEditor 1.4a   
   TID: hpt/lnx 1.4.0-sta 16-02-06   
   On 05-01-2024 20:07:20, Ginger1 writes:   
      
   > Hi all,    
   > Trying my luck with an Amiga issue on this C= echo.    
   > I'm having issues with formatting (nevermind writing to or reading from)    
   > on my 1200.    
   > I've basically stiffed the internal drive. Now, trying to format a floppy    
   > my external drive...I get a consistent "Couldn't format Cylinder 0" error.    
   > floppies in question were very well cared for and previously working fine    
   > and it is happening across all of them.    
   > I'm worried I have somehow fried the drive logic on the motherboard, as I    
   > previously having the same issue on the internal drive (leading to my    
   >  repair attempts.)    
   > Any ideas or suggestions much appreciated!    
      
   Hi, it seems like a High Density - Low-Density problem.   
   Try covering the little window on the right with some tape.   
      
      
   Ciao.   
   Felix   
      
   --- FidoEditor v1.4a   
    * Origin: MaxBBS - Salerno, Italia (2:335/206.0)   
   SEEN-BY: 1/19 15/0 16/0 18/200 19/10 37 90/1 105/81 106/201 123/130   
   SEEN-BY: 128/260 129/305 132/174 135/225 142/104 153/7715 203/0 218/700   
   SEEN-BY: 221/1 6 360 226/30 227/114 229/110 112 113 206 275 307 317   
   SEEN-BY: 229/400 426 428 470 664 700 230/0 240/1120 5832 266/512 280/5003   
   SEEN-BY: 282/1038 291/111 301/1 320/119 219 319 2119 322/0 757 325/304   
   SEEN-BY: 326/101 331/313 333/808 334/10 335/206 364 370 601 341/66   
   SEEN-BY: 342/19 200 396/45 423/81 460/58 712/848 5020/400 5058/104   
   SEEN-BY: 5075/35   
   PATH: 335/206 364 221/6 1 320/219 229/426