INTL 3:770/1 3:770/3
REPLYADDR ank@spamfence.net
REPLYTO 3:770/3.0 UUCP
MSGID: <87lebj6753.fsf@usenet.ankman.de> 0e73bcda
REPLY: 2c6e49d9
PID: SoupGate-Win32 v1.05
On Mon, 30 Oct 2023 21:28:34 +0200, Anssi Saari wrote:
>
> Jan van den Broek writes:
>
>> But to get a bit on-topic, here is a Basic-program:
>> 10 poke 53280,0:poke 53281,0
>> 20 s$="acgt"
>> 30 c$=chr$(28)+chr$(30)+chr$(31)+chr$(158)
>> 40 r=1+int(rnd(0)*4)
>> 50 print mid$(c$,r,1);mid$(s$,r,1);
>> 60 goto 40
>
> Pretty cool.
I was also about to type it into the VICE emulator.
> So what's a convenient command line way to get from an ascii basic
> listing to a prg inside a d64 image? After some looking I used tok64 and
> c1541.
>
> Second place was bastext to t64 and then to d64 via c1541 but I was
> weirded out since it seems the only binary output bastext is willing to
> do is a t64 file. And while c1541 should handle those, it didn't in this
> case.
So no image created?
I'll write it down then at the weekend and type it into the C64 (emulated
in VICE). Can upload the image to my web server for others then.
--
Andr *can wait to see what it does* eas
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 1/123 10/0 1 15/0 18/200 90/1 102/401 103/1 705 105/81 106/201
SEEN-BY: 123/131 129/305 153/757 7715 154/10 214/22 218/0 1 215 601
SEEN-BY: 218/700 840 860 870 880 930 220/70 221/1 6 226/17 30 227/114
SEEN-BY: 229/110 112 113 206 275 307 317 400 426 428 470 664 700 240/1120
SEEN-BY: 266/512 267/800 282/1038 291/111 301/1 113 305/3 317/3 320/219
SEEN-BY: 322/757 335/364 341/66 342/200 396/45 460/58 633/280 712/848
SEEN-BY: 770/1 3 100 340 772/210 220 230 5020/400 5058/104 5075/35
PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426
|
